LumberJocks

Everly's Changing Table

  • Advertise with us
Project by Sigo posted 03-06-2018 03:29 PM 286 views 0 times favorited 2 comments Add to Favorites Watch

Just completed this changing table for my first grandchild. My daughter-in-law found a picture of one she liked on Pinterist. It is based off the “Rustic X DIY Changing Table” plan posted by rougeengineer.com. It is made of 8/4 poplar. The bottom is two coats of semi-gloss latex applied with a foam roller. The top is finished with two coats of wax-free shellac/denatured alcohol, followed by Transtint Dark Walnut in denatured alcohol, followed by one coat of wax-free shellac/denatured alcohol, followed by General Finishes Gel Antique Walnut stain, followed by General Finishes Arm-R-Seal Semi-Gloss Topcoat. I generally followed the dimensions as posted by rougeengineer but modified the joinery significantly. The “X” was half lap and the sides were joined with loose tenons or dowels. The piece that holds the changing pad was mitered and glued using biscuits and is held in place with screws from the bottom. In the future, this piece can come off and holes filled with dowels to be used as a standard console table. Although there are a few flaws that most will never notice, overall, I’m pleased with the outcome. I really enjoyed making it and my son and daughter-in-law seemed to really like it.





2 comments so far

View DougN's profile

DougN

62 posts in 2379 days


#1 posted 03-08-2018 04:01 AM

Very nice table!

-- Doug - Montgomery, Tx

View Sigo's profile

Sigo

17 posts in 1945 days


#2 posted 03-08-2018 05:26 PM



Very nice table!

- DougN


Thanks, Doug.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com