Martial Art Jumpstands

  • Advertise with us
Project by ChefHDAN posted 09-01-2010 02:36 AM 1487 views 0 times favorited 3 comments Add to Favorites Watch

I built these to replace a set that was built from ripped 2×4’s that had started to warp and were snapped by a low belt that tried to jump sideways, they support a piece of plastic conduit and are used in training to develop leg muscles by jumping. It was a partial gift to my Grand Master and partial payment for one of my black belt tests. It got a bit tricky to figure out how to execute and replicate the two vertical pieces… so as is most often the answer I built a jig out of 1/2” ply and used a pattern bit after rough cutting the shapes on the BS. I used oak ply this time and made them another 18” taller so they should have a very long life in the Do-jang. They are secured to the base with biscuits and #14 2” screws, the base conceals two pieces of 3/4 MDF which give excellent weight for stabillity… as for the edge grain on the saw tooth, I just couldn’t figure a way to cover it, so I left it exposed

3 comments so far

View Popsnsons's profile


338 posts in 1979 days

#1 posted 09-01-2010 03:10 AM

Very unique project. Nice results too.

-- Pops ~ In So Cal...

View BigTiny's profile


1667 posts in 1886 days

#2 posted 09-01-2010 11:26 AM

Ichi-ban job.

-- The nicer the nice, the higher the price!

View ChefHDAN's profile (online now)


561 posts in 1847 days

#3 posted 09-13-2010 12:31 AM

Cam sam hamnidah!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics