LumberJocks

Custom low entertainment center

  • Advertise with us
Project by grosa posted 08-31-2010 04:26 AM 1928 views 4 times favorited 13 comments Add to Favorites Watch

This was a residential job. This e.t. was made from maple and it was stained with an aniline orange dye then stained with a light cherry stain. All the shelves and compartments were made to fit each component.

-- Have a great day.





13 comments so far

View Dan Hux's profile

Dan Hux

576 posts in 2097 days


#1 posted 08-31-2010 04:57 AM

that is very nice, great color

-- Dan Hux,,,,Raleigh, NC http://whitdaniel.com

View grosa's profile

grosa

899 posts in 1552 days


#2 posted 08-31-2010 05:09 AM

Thank you Dan.

-- Have a great day.

View tonycr28's profile

tonycr28

62 posts in 1859 days


#3 posted 08-31-2010 05:13 AM

Good job. That looks awesome. Very detailed. Congratulations on amazing work. Thanks for sharing.

-- Tony, Pliny,WV "Never do a wrong thing to make a friend or keep one."- Robert E. Lee

View grosa's profile

grosa

899 posts in 1552 days


#4 posted 08-31-2010 05:50 AM

Thank you.

-- Have a great day.

View RonPeters's profile

RonPeters

708 posts in 1603 days


#5 posted 08-31-2010 05:58 AM

Very nice work.

Is that a woofer space in the middle? It looks like a speaker covering….?

-- “Once more unto the breach, dear friends...” Henry V - Act III, Scene I

View grosa's profile

grosa

899 posts in 1552 days


#6 posted 08-31-2010 06:31 AM

Yes Ron.

-- Have a great day.

View a1Jim's profile

a1Jim

112529 posts in 2300 days


#7 posted 08-31-2010 07:18 AM

Niiiiiiiiiice great job

-- http://artisticwoodstudio.com Custom furniture

View Ken90712's profile

Ken90712

15161 posts in 1911 days


#8 posted 08-31-2010 10:46 AM

Great build and nice color.

-- Ken, "Everyday above ground is a good day!"

View grosa's profile

grosa

899 posts in 1552 days


#9 posted 09-01-2010 04:09 AM

Thank you.

-- Have a great day.

View JonKroeber's profile

JonKroeber

1 post in 1526 days


#10 posted 09-22-2010 09:13 PM

I am sure this may be in poor taste but do you have plans for this or a direction to point me in. I am new to woodworking and have only a few projects under my belt but my wife loves this piece and is begging me to build something similar for our family room.

View Abbott's profile

Abbott

2570 posts in 2026 days


#11 posted 09-22-2010 09:17 PM

Very nice looking piece…I like the finish.

-- Ohh mann...pancakes and boobies...I'll bet that's what Heaven is like! ♣ ♣ ♣ ♣

View grosa's profile

grosa

899 posts in 1552 days


#12 posted 09-26-2010 05:26 PM

JonKroeber, sorry I do not have any prints but, I will help you in any way I can If you want to build one.

-- Have a great day.

View grosa's profile

grosa

899 posts in 1552 days


#13 posted 03-17-2012 01:04 PM

JonKroeber, All I can say is measure your components to make sure it all fits. Then figure out what hinges you are going to use. Then sketch it out so you have a plan. Start by making the box with the dividers. Make the corner pieces with the stop fluting, the rosets are store bought. Lay out your doors for the hinges you are using. Make your raised panels. put it all together to make sure it works. take it apart and sand it. Apply the finish. Hope this helps.

-- Have a great day.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase