LumberJocks Woodworking Forum banner

Project Information

This table was built using 2×8 clear pine for the top. Glues and biscut jointed as well as some oak splines on the ends (more for looks) but it does help a little structully. The base is 2×4s jointed and planed and laminated with finger joint style corners. The top is elevated by 4 blocks of pine painted black and is sandwiched between base and top and fastened with 4 exposed carriage bolts to add a little of the industrial look. The edges of the top we cut in an irregular pattern and filed/sanded to obtain a cleaned live edge look.

Gallery

Comments

· Registered
Joined
·
1,434 Posts
That is a very interesting design. If you have more photos, that would be great to see.
 

· Registered
Joined
·
8,785 Posts
Very stout looking table… should last a few generations at least.
 
Top