LumberJocks

Drilling table

  • Advertise with us
Project by erkkki posted 1451 days ago 2800 views 11 times favorited 7 comments Add to Favorites Watch

I always have difficulties in drilling holes at the edges.
Boards can be moved left and right, and the depth of drilling down and backwards
Height adjustment is by raising and lowering the work unit (last 2 pic)

As work progresses, I add there some parts to hold town the workpiece
Also something to make easier measuring and adjusting
Those parts i want to add later because then I but those exactly like they are comfortable to use.

First peaces I tried to drill and those are 10+ so this table is working.

-- look at me - http://www.hot.ee/enaaris/enghome.html





7 comments so far

View KnotCurser's profile

KnotCurser

1812 posts in 1692 days


#1 posted 1451 days ago

Very cool!

Where there is a will…...........

This takes up way too much space for my garage, but if you have the need this is a great solution!

-- Robert Rhoades WoodWorks / Email: rrww@rhoadesclan.com / www.rhoadesclan.com

View majuvla's profile

majuvla

3305 posts in 1491 days


#2 posted 1451 days ago

Thanks for idea,but I have to build it a little bit smaller for my workshop.

-- Ivan, Croatia, Wooddicted

View BritBoxmaker's profile

BritBoxmaker

4352 posts in 1660 days


#3 posted 1451 days ago

Excellent design. Look forward to seeing any add-ons.

-- Martyn -- Boxologist, Pattern Juggler and Candyman of the visually challenging. http://www.theartofboxes.com

View zlatanv's profile

zlatanv

689 posts in 1858 days


#4 posted 1451 days ago

very cool! wonder if you could use an up cut router bit to make mortises?

-- Z, Rockwall, TX

View Dennisgrosen's profile

Dennisgrosen

10850 posts in 1739 days


#5 posted 1451 days ago

exelent idea , love it, this is one of them …why didnĀ“t I think of…
I have always struggled with this kind of holes
it goes right up to my memery bank the favorits :-)

thanks for sharing it

Dennis

View erkkki's profile

erkkki

39 posts in 1727 days


#6 posted 1448 days ago

I used Ball Bearing Drawer Slides. I do not worry about the dust. I clean the slides with air during drilling. and if there is problem with slides it is easy to change those, also they are very cheap.

-- look at me - http://www.hot.ee/enaaris/enghome.html

View falegniam's profile

falegniam

333 posts in 1576 days


#7 posted 1321 days ago

Nice idea…you made a horizontal router table…interesting.

-- If you work you eat - If you don't work, you eat, drink, and sleep.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase