LumberJocks

VCG fir tool board

  • Advertise with us
Project by jc066 posted 02-11-2018 03:50 AM 575 views 0 times favorited 2 comments Add to Favorites Watch

Here are the pictures of the new tool board that I made. This is a direct make from Dan Faia’s FWW HANDTOOLS issue. I was in desperate need of a tool board when I saw his article, so made it.
The material used is vertical grain Doug fir that I salvaged out of a single board for the sides and top. The top is connected by dovetail joints. The bottom stretcher is mortise and tenon. The back is other fir flooring that I also salvaged from a firewood bin. The shelf was the old piece purchased and it is VCG fir as well.

There are two coats of finish on it now.
You can also see the crack that I repaired with superglue. That crack was the reason it got thrown out I think.

I also added a picture of tools added, although placement still to finalized.





2 comments so far

View JuniorJoiner's profile

JuniorJoiner

487 posts in 3612 days


#1 posted 02-11-2018 04:02 AM

nice ,dovetails , tool storage and cheap, the trifecta.

-- Junior -Quality is never an accident-it is the reward for the effort involved.

View helluvawreck's profile

helluvawreck

32087 posts in 3039 days


#2 posted 02-11-2018 04:47 PM

Nice work!

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com