LumberJocks

Turned Wood Goblet in Cherry

  • Advertise with us
Project by Mikemccind posted 02-10-2018 08:55 PM 384 views 0 times favorited 2 comments Add to Favorites Watch

My first turned goblet. Followed steps from demo training at my local Woodcraft store. Used a cherry blank that I started between centers. Rounded the stock and turned a tenon to fit my scroll chuck. Flipped it around and then hollowed out the cup end. Sanded and finished it before moving to the outside profile. I used a foam pad in the cup for protection from my live center so I could use the tail stock. Worked on the cup outside profile and then progressed down to the stem details and finally to the base. Sanded to 400 grit and applied sanding sealer. Used Yorkshire Grit and Hampshire Sheen High Gloss for the finish. Parted off the base with a slight under cut and then finished the bottom by hand using a sanding pad in a Jacobs chuck on the lathe.

-- Mike, North Webster, IN





2 comments so far

View John's profile

John

1205 posts in 1352 days


#1 posted 02-10-2018 11:12 PM

Nice job on the goblet Mike and your garage looks spotless!

-- John, Sunshine Coast, BC, Canada.

View helluvawreck's profile

helluvawreck

31985 posts in 2949 days


#2 posted 02-11-2018 04:41 PM

This is a beautiful goblet and you did a fine job on it. Nice work!

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com