Homemade table saw

  • Advertise with us
Project by maralb posted 01-30-2018 01:48 PM 1236 views 0 times favorited 5 comments Add to Favorites Watch

I make my own 14 inches Blade, Table saw with a 5 hp motor.

5 comments so far

View bushmaster's profile


2700 posts in 2188 days

#1 posted 01-30-2018 03:00 PM

100% home made, bet it will cut just as fast as a commercial one. Interested in your homemade blade, find that hard to believe.

-- Brian - Hazelton, British Columbia

View bigblockyeti's profile


4991 posts in 1626 days

#2 posted 01-30-2018 05:28 PM

Very cool! Looks like the on built by Mathias Wandel’s dad.

View EarlS's profile


744 posts in 2254 days

#3 posted 01-30-2018 06:02 PM

Sorry, but that set up scares me. Way too many things that can go wrong with horrific results.

-- Earl "I'm a pessamist - generally that increases the chance that things will turn out better than expected"

View MrRon's profile


4632 posts in 3149 days

#4 posted 01-30-2018 07:26 PM

I made my first table saw about 70 years ago. It was only 8” and the motor was 1/4 hp; no tilt.

View RPhillips's profile


1154 posts in 1742 days

#5 posted 01-30-2018 11:28 PM

A weeeeee bit harry… maybe some videos of it in action would sway me.

Is that a 14”? Looks like a 10” blade on there…

-- Rob - Indianapolis IN - Learning... one mistake at a time...

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics