LumberJocks

Wine rack

  • Advertise with us
Project by Matt posted 01-24-2018 01:20 PM 1198 views 7 times favorited 7 comments Add to Favorites Watch

Built this wall mounted wine rack/wine glass holder for my sister in law. Made with red oak and i used drawer pulls for the wine bottle stops. Drew the plans in Google sketchup. While i was building it i decided to remove one of the shelves for a better fit on the wall.





7 comments so far

View torus's profile

torus

158 posts in 560 days


#1 posted 01-24-2018 02:50 PM

I like it. Very functional and using drawer pulls is great isea!

-- "It's getting better..." - put this on my RIP stone!

View Rick S.'s profile

Rick S.

10571 posts in 3179 days


#2 posted 01-24-2018 04:49 PM

Very Nice Indeed Matt!

-- (Rick S.)... "Don't Worry About What People Think! They Don't Do It Very Often Anyway!"

View Diggerjacks's profile

Diggerjacks

2270 posts in 3285 days


#3 posted 01-24-2018 05:47 PM

Hello Matt

Very nice design and great work

Thanks for sharing

-- Diggerjack-France ---The only limit is the limit of the mind and the mind has no limit

View Matt's profile

Matt

3 posts in 270 days


#4 posted 01-25-2018 01:51 AM

Thanks! This was one of my first “big” projects. The other was a hall table – I’ll try to post some pictures of it soon.

View dannmarks's profile

dannmarks

623 posts in 728 days


#5 posted 01-25-2018 09:22 AM

Indeed cool work. I like the simple drawing. Well done from start to finish.

View psully's profile

psully

66 posts in 429 days


#6 posted 01-27-2018 04:46 PM

Nice design – I like the idea of combining wine and glass storage on a single wall unit. Good plan, well executed. Any issue with chip-out on the red oak with the slots for the stems of the glasses ?

View Matt's profile

Matt

3 posts in 270 days


#7 posted 01-31-2018 08:43 PM


Nice design – I like the idea of combining wine and glass storage on a single wall unit. Good plan, well executed. Any issue with chip-out on the red oak with the slots for the stems of the glasses ?

- psully


There was a little chip out making the holes. Unfortunately I don’t currently have a drill press so i had to make them with a drill and spade bit. I should have either used a backerboard or flipped the piece over to finish each hole to minimize any chip out. Luckily with adding the shelf above the glasses you can’t really see any if it. Hopefully I’ll have a dp and some forstner bits soon for more precise/cleaner holes

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com