LumberJocks

Cnc router machine

  • Advertise with us
Project by LittleCobra posted 01-24-2018 12:57 AM 1847 views 1 time favorited 8 comments Add to Favorites Watch

Finally finished cnc router





8 comments so far

View Kelster58's profile

Kelster58

670 posts in 684 days


#1 posted 01-24-2018 01:26 AM

Very cool…was it a kit or your design???

-- K. Stone “Tell me and I forget, teach me and I may remember, involve me and I learn.” ― Benjamin Franklin

View Desert_Woodworker's profile

Desert_Woodworker

1615 posts in 1359 days


#2 posted 01-24-2018 09:17 AM

Nice job-

-- Desert_Woodworker

View helluvawreck's profile

helluvawreck

32083 posts in 3011 days


#3 posted 01-24-2018 03:07 PM

You did a fine job on this CNC machine.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View Redoak49's profile

Redoak49

3524 posts in 2133 days


#4 posted 01-25-2018 12:36 AM

Looks very nice….I would be interested in how you built it, was it a kit….?

View LittleCobra's profile

LittleCobra

48 posts in 1126 days


#5 posted 01-25-2018 07:53 AM

I used plans I purchased at Solsylva.com. It was $39 I believe for 5 different plans and well worth the cost in my opinion. Being a total noob to cnc there was a bit of a learning curve and I have found it very interesting. I still have a lot to learn especially on the software side of things. If you have a fair knowledge of machine work and a drill stand along with hand tools you can build one of these took me about 2 months off and on. Thanks for the kind words and happy scrap making.

View mikeacg's profile

mikeacg

675 posts in 1202 days


#6 posted 01-27-2018 01:10 PM

Very nice looking machine! Looks like you have a decent Z axis with that gantry. What kind of stuff are you looking to make? Be sure to post pictures of your progress…
The website is interesting! Thanks for sharing!

Mike

-- Mike, A Yooper with a drawl, http://www.artcentergraphics.com

View Sputnik57's profile

Sputnik57

1 post in 264 days


#7 posted 01-27-2018 09:16 PM

Nice looking machine. I bought the 5-plan set recently and after going back and forth also chose the V-bearing machine design. I plan to expand it a little to a 24” x 48” cutting area. I was curious how you mounted your router to the Z axis (?) Thanks!

View LittleCobra's profile

LittleCobra

48 posts in 1126 days


#8 posted 02-02-2018 02:13 AM

I plan on doing mostly relief carving. I decided on the Bosch colt for the router. It’s small and has plenty of power for what I’m doing. The mount is an aluminum clamp type made specifically for the Colt and available at various web sites like ” Instructables” . Thanks for the good words all.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com