LumberJocks

Ravioli Rolling Pin

  • Advertise with us
Project by Silvio posted 01-17-2018 05:15 PM 838 views 2 times favorited 8 comments Add to Favorites Watch

Had some surplus 1 7/16 thick oak lying in the corner so decided to make my wife a Ravioli Rolling Pin. Cut the oak into 3.5 inch squares and glued them all together. Once i squared the block up on the table saw I cut a 3/4 dado down the center on each side. Wish I had a lathe in my shop at this point but i ended up cutting 3/4 inch squares and numbered each piece inside the dado to keep them in order. Cut some walnut to size to fit the dado and glued and clamped everything together for a couple of hours. You will want to cut the walnut runners to end up being little proud for sanding.

Just gave it to my wife …she loves it

-- May The Attitude of Your Faith Always Enrich The lives of Others





8 comments so far

View Ted78's profile

Ted78

401 posts in 2085 days


#1 posted 01-17-2018 07:37 PM

Very nice, I made a couple of these myself for Christmas presents. I have to ask what the turkey feather is for?

-- Ted

View Silvio's profile

Silvio

40 posts in 485 days


#2 posted 01-17-2018 10:39 PM

I use these small turkey feathers for mixing sawdust and glue….they work awesome

-- May The Attitude of Your Faith Always Enrich The lives of Others

View bushmaster's profile

bushmaster

3143 posts in 2367 days


#3 posted 01-18-2018 01:01 AM

Never seen one, and don’t have a clue how they work. hope there is a Utube demonstration out there

-- Brian - Hazelton, British Columbia

View Knockonit's profile

Knockonit

420 posts in 287 days


#4 posted 01-18-2018 01:07 AM

tutorial starts with head chopping, working its way into feather plucking, then cooking and eating, feathers are a plus after the blessed event.
Rj

View Silvio's profile

Silvio

40 posts in 485 days


#5 posted 01-18-2018 02:49 AM

Yes they are

-- May The Attitude of Your Faith Always Enrich The lives of Others

View helluvawreck's profile

helluvawreck

31994 posts in 2951 days


#6 posted 01-18-2018 02:30 PM

This project turned out nicely.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View Silvio's profile

Silvio

40 posts in 485 days


#7 posted 01-18-2018 02:36 PM

Thank you Charles…after a good sanding…I rubbed some coconut oil in and what a nice finish it gave…

-- May The Attitude of Your Faith Always Enrich The lives of Others

View lew's profile

lew

12211 posts in 3840 days


#8 posted 01-18-2018 03:03 PM

Nicely done!

I have heard that coconut oil is better than mineral oil for rolling pins. Better antimicrobial properties.

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com