Dewalt 735x Planer Stand

  • Advertise with us
Project by AaronS posted 12-27-2017 10:23 PM 1401 views 9 times favorited 5 comments Add to Favorites Watch

My old planer finally gave out so I upgraded to the Dewalt. First, I have to say I love this planer. It works great and comes with a built in blower to remove the chips from the cutting head, which also works really well. I tried using the planer without any dust collection attached to the blower and let me tell you, it will blow chips 20 feet easily!

Therefore, I needed some way to contain the chips in my shop. I copied Kelly's design (thank you) extensively at:

This is two chambers, with the hose connected to a 4 inch 90 degree angle from Rockler. This blows the chips into the main collection drawer which is sealed with silicone and weather stripping. The air then blows into the second chamber through another 4 inch 90 degree angle. This chamber is also sealed with silicone and weather stripping. The air exits through a regular house HVAC filter that can be easily replaced.

I expected this to work well, but I was surprised at exactly how well it works! Hope this helps some of you out, and again, thank you Kelly.

5 comments so far

View EarlS's profile


808 posts in 2280 days

#1 posted 12-28-2017 12:04 AM

Interesting approach to DC for your planer. I have the same planer and I hook it to a garbage can separator then into the main DC. The blower on the planer wreaks havoc with the vacuum system pressure profile and a lot of the chips and dust wind up in the cyclone and either drop out into the dust bin or go through the blower into the pleated filter. I like this idea where the blower on the planer pushes the dust into the dust bin on the cart and the air is vented through the furnace filter.

Do you have problems with the planer blower plugging?

-- Earl "I'm a pessamist - generally that increases the chance that things will turn out better than expected"

View helluvawreck's profile


30485 posts in 2798 days

#2 posted 12-28-2017 02:04 PM

This planer stand is so nice. Congratulations. It will be a fine addition to your shop.

helluvawreck aka Charles

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View DeLayne Peck's profile

DeLayne Peck

516 posts in 2133 days

#3 posted 12-28-2017 03:53 PM

Just excellent. Wish I had could have built those features into my planer cart.

-- DJ Peck, Lincoln Nebraska. Lord, keep your arm around my shoulder and your hand over my mouth.

View Kelly's profile


66 posts in 1740 days

#4 posted 12-29-2017 02:47 PM

Aaron, that looks awesome! I really like the drawer, much more convenient than setup.

View AaronS's profile


28 posts in 1541 days

#5 posted 12-29-2017 04:17 PM

Earl – I haven’t had any problems with the planer blower plugging, but I have only run a few boards through it.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics