LumberJocks

Hui Jig

  • Advertise with us
Project by socrbent posted 12-18-2017 02:59 AM 851 views 2 times favorited 2 comments Add to Favorites Watch

Used to mass produce Hui Games (http://lumberjocks.com/projects/352249). Allows easily cutting of the wedges. Two runners (photo 2) were glued to a thin base parallel to each other. Base (photo 2) was sized to allow clamping to the scroll saw. The V cut in the slider (photo 4) holds the hui stick on the side for cutting. The x rabbets (photo 5) on bottom of slider allow it to be held in either of the 45 degree angles. Photo 6 shows a stick ready for next cut. Use double stick tape to add a stop (photo 3) that controlled depth of cut and was moved to cut opposite angle.

-- socrbent Ohio





2 comments so far

View Jim Jakosh's profile

Jim Jakosh

20600 posts in 3134 days


#1 posted 12-20-2017 12:44 AM

Slick jig. That are so handy for production!!

Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View socrbent's profile

socrbent

613 posts in 2298 days


#2 posted 12-20-2017 01:32 AM

THanks. Made 4 more today.

-- socrbent Ohio

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com