Wine Cabinet Insert

  • Advertise with us
Project by NoSlivers posted 07-29-2010 05:19 PM 3512 views 0 times favorited 2 comments Add to Favorites Watch

I didn’t build the cabinet, just the insert to hold the bottles. A fairly quick “honey-do” that will undoubtedly cost more money since now we have some obligation to fill the spaces.

It’s all 1/2”AC ply, with madrone trim on the front face. At this point I have finally used up almost all of the madrone that I have. I generally prefer not to work with plywood, but for this project it seems to make better sense. If I was building the entire cabinet, I would’ve opted differently.

In picture #2, I am in the process of trying to get the spacing right. Easy enough to measure out but since I am a visually oriented person, I need to see the spaces to know whether I need to shift my lines to make the compartments smaller or larger. This is quite a departure from the original plan on paper!!

-- If you don't have time to do it right, do you have time to do it twice?

2 comments so far

View lumberdustjohn's profile


1263 posts in 3164 days

#1 posted 07-29-2010 05:23 PM

quite complimentary to the original.
Nice look
Thanks for posting.

-- Safety first because someone needs you.

View workerinwood's profile


2717 posts in 3065 days

#2 posted 07-29-2010 05:30 PM

Great job!!

-- Jack, Albuquerque

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics