|Project by Canadian Woodworks||posted 07-18-2010 03:14 AM||2455 views||4 times favorited||6 comments|
This table was built using 2’’ eastern white cedar, staing with japanese maple and jacobean to match the customers chairs, the chairs in the picture are mine and do not reflect to same colour.
I used 2 3’’ screws at all the end grain joints, with tite bond 3 glues used at all joints.
I used 1/2’’ clear rubber nobbies epoxied to the glass that sit in recessed holes in the cedar to hold to top in place, works very well and the top can be remove at any time
The table is height of the arms of the Adirondack chairs I make with a 36’’ glass top.
-- Paul Lemiski, Ontario Canada, Custom Wooden Rocking chairs and tables http://www.canadianwoodworks.com