LumberJocks

Pallet coffee table

  • Advertise with us
Project by KonaCustom posted 11-08-2017 10:45 PM 301 views 0 times favorited 2 comments Add to Favorites Watch
Pallet coffee table
Pallet coffee table No picture No picture No picture No picture No picture
Zoom Pictures

This coffee table was made from a couple pallets I found. Usually there are gaps on pallets but I lucked out and found a couple that had no gaps for the most part except on the ends, no problem just took the skilsaw and cut those parts off. Then I trimmed out the sides with Douglas Fir 2×6 for the top, ripped another 2×6 with the skilsaw to fit the bottom trim. I cut a 4×4 to act as legs in connecting the top boards to the bottom boards. Stained with Miniwax Ipswich Pine and finished with satin polyurethane.

-- Joel, Poway





2 comments so far

View Jim Jakosh's profile

Jim Jakosh

19794 posts in 2943 days


#1 posted 11-09-2017 02:53 AM

Very sturdy table, Joel!!

Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View helluvawreck's profile

helluvawreck

29174 posts in 2704 days


#2 posted 11-09-2017 04:19 PM

This is a nice rustic table. Congratulations.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com