LumberJocks

Raccoon in a leaf

  • Advertise with us
Project by Greg posted 1471 days ago 1984 views 0 times favorited 10 comments Add to Favorites Watch
Raccoon in a leaf
Raccoon in a leaf No picture No picture No picture No picture No picture
Zoom Pictures

I finished this up last night, the pattern is from one of our own here, Scrollgirl, thanks Sheila. I cut this from 1/2” pine and finished it with danish oil

-- Greg S.E. Ga. www.thesawdustfactory.net





10 comments so far

View a1Jim's profile

a1Jim

111999 posts in 2174 days


#1 posted 1471 days ago

Lots of detail good job

-- http://artisticwoodstudio.com Custom furniture

View Woodenwizard's profile

Woodenwizard

1056 posts in 1652 days


#2 posted 1471 days ago

Nice Job! Those leaf patterns seem to be pretty popular.

-- John, Colorado's (Wooden Wizard)

View Ken90712's profile

Ken90712

14821 posts in 1786 days


#3 posted 1471 days ago

Took some time I’m sure, alot of good lines in this well done!

-- Ken, "Everyday above ground is a good day!"

View Mary Anne's profile

Mary Anne

1057 posts in 1806 days


#4 posted 1471 days ago

Nice job! Looks like a lot of work to get that detail.
I like the pattern… And so does my hat! :)

View Eagle1's profile

Eagle1

2064 posts in 1662 days


#5 posted 1471 days ago

Nice piece..

-- Tim, Missouri ....Inside every older person is a younger person wondering what the heck happened

View woodbutcher's profile

woodbutcher

592 posts in 2763 days


#6 posted 1470 days ago

Greg,
I’ll bet that tail was the hardest part or at least caused the most anxiety! Nice looking cutting and I really like the uniqueness of the pattern, Scrollgirl has a real winner here! Congratulations on an excellent project.

Sincerely,
Ken McGinnis

-- woodbutcher north carolina

View Greg's profile

Greg

221 posts in 2055 days


#7 posted 1470 days ago

It took about 2 hours to cut.

Mary Anne, do you wear that hat all the time?!!!!

Ken, the tail wasn’t too bad, the worst were the pieces in the leaf that look like little fingers,

-- Greg S.E. Ga. www.thesawdustfactory.net

View JFFWC's profile

JFFWC

10 posts in 1471 days


#8 posted 1470 days ago

Very nice!

-- Tim -- Kent, WA

View Sheila Landry (scrollgirl)'s profile

Sheila Landry (scrollgirl)

7470 posts in 1517 days


#9 posted 1470 days ago

You did a great job on the plaque, Greg! It really looks nice. The oil looks really good on the pine, too. It is nice to see. :)

Sheila

-- Contributing Editor, Creative Woodworks and Crafts Magazine, If you like reading my blog, come visit at Sheila Landry Designs http://www.sheilalandrydesigns.com "Knowledge is Power"

View Mary Anne's profile

Mary Anne

1057 posts in 1806 days


#10 posted 1470 days ago

Greg,
There is no refusing the hat… she sits where she wants when she wants. ;)

I may have to dig out the scroll saw just to make one these designs.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase