| Project by Billinmich | posted 1071 days ago | 863 views | 0 times favorited | 4 comments |  |
 |
I posted this vase a few days ago.This is my fix,I had to use a screw chuck in the bottom,mounted back on lathe and parted off broken pieces and glued on a piece of walnut which allowed me to mount to a face plate and fix the bottom,screw chuck went all the way through so I had to glue in a patch.I built a steady rest to help keep the vase on the lathe this time.Thanks to everyone who encouraged me to fix it rather than the fire pit.
-- Bill in Mich
| Pin It |
4 comments so far
kolwdwrkrsgirl
home | projects | blog
550 posts in 1371 days
#1 posted 1071 days ago
Excellent fix…..see…I knew it would turn out great in the end! : ) No one would ever know it was supposed to be any different then it is if you hadn’t shown us. Good work Bill!!
-- Heidi :) “The only source of knowledge is experience”
RayCurtis
home | projects | blog
128 posts in 1361 days
#2 posted 1071 days ago
except for the third picture, I would have no idea that you didn’t design it this way,..
-- RayCurtis
Flemming
home | projects | blog
417 posts in 1093 days
#3 posted 1071 days ago
looks fantastic :) good job, good fix!
-- Flemming. It's only a mistake if you can't fix it.
jockmike2
home | projects | blog
10635 posts in 2443 days
#4 posted 1070 days ago
Nice fix, nice bowl.
-- (You just have to please the man in the Mirror) Mike from Michigan -
Have your say...