Router Table/Fence and Cope Sled

  • Advertise with us
Project by Jon Brandt posted 07-08-2010 05:33 PM 6845 views 4 times favorited 2 comments Add to Favorites Watch
Router Table/Fence and Cope Sled
Router Table/Fence and Cope Sled No picture No picture No picture No picture No picture
Zoom Pictures

This is my very first router table/fence and cope sled I build while back. Table top are 24 by 16 inches and the legs are steel tube that screw under the table top. It also very light that sometime it move as I feed the work through it so sometime I would hook the leg with my foot to make it stay-put otherwise it work very good, very portable, too. Currently it is unscrewed and put away inside my workbench, not use it for pretty long time since I build better router table.

2 comments so far

View lanwater's profile


3111 posts in 2957 days

#1 posted 07-08-2010 06:36 PM

Good job.

How does the coping sled ride on the table. I do not see a track.

-- Abbas, Castro Valley, CA

View Jon Brandt's profile

Jon Brandt

16 posts in 2905 days

#2 posted 07-08-2010 07:04 PM

I have 1×2 board nailed under the sled on the edge and it ride against the table top edge.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics