Coping sled.

  • Advertise with us
Project by Cweatherl posted 10-08-2017 06:44 PM 1573 views 0 times favorited 3 comments Add to Favorites Watch

I made this Corian coping sled. It’s a combination of Rockler and the Infinity Tools designs. I could see the benefits of having a clamp on the waste piece. The work piece holds just fine though. I used the Bessey auto adjust toggle clamp to hold the work in place along with some 150 grit sand paper on the bottom and the back lip which supports the waste / backer piece. The plexiglass shield on top is dual purpose. I first register that to the Incra fence and then slide the work piece up to the fence and lock it down. The sled isn’t near the fence as the plexiglass sets out 5/8” from the edge.
I recently remodeled our kitchen and am using this to make all of my rails for the panel doors.

-- If you look for the bad in mankind expecting to find it, you surely will. Abraham Lincoln (1809 - 1865)

3 comments so far

View helluvawreck's profile


30177 posts in 2776 days

#1 posted 10-08-2017 06:48 PM

You did a nice job on this sled.

helluvawreck aka Charles

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View Cweatherl's profile


62 posts in 1357 days

#2 posted 10-08-2017 08:17 PM

Thank you Charles. Having a CNC in my tools has opened up all kind of possibilities.

-- If you look for the bad in mankind expecting to find it, you surely will. Abraham Lincoln (1809 - 1865)

View a1Jim's profile


116912 posts in 3486 days

#3 posted 10-08-2017 08:33 PM

Very useful tool , well done.

-- Custom furniture

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics