LumberJocks

Kitchen table

  • Advertise with us
Project by AandCstyle posted 09-30-2017 07:08 PM 1448 views 8 times favorited 25 comments Add to Favorites Watch

We currently have a glass table in our kitchen which I don’t find aesthetically pleasing so I decided to make one that would fill the bill. I really didn’t have to work too hard to get approval from the kitchen supervisor either. :)

The table is qswo and measures 42” across and stands 30” high. I finished it with Minwax Golden Oak 610B and 3-4 coats of Arm-R-Seal with light sanding with 400G between coats. Now, I need to wait for the finish to completely cure before putting the table into service.

I will post a detailed blog as well should anyone have any questions. Thanks for looking!

-- Art





25 comments so far

View Jerry's profile

Jerry

2900 posts in 1854 days


#1 posted 09-30-2017 07:36 PM

Absolutely beautiful work, especially on the sawing! I love the style and design. The through tusk tenons just add the finishing touvh to this masterpiece. Great job!

-- There are good ships and there are wood ships, the ships that sail the sea, but the best ships are friendships and may they always be. http://www.geraldlhunsucker.com/

View waho6o9's profile

waho6o9

8525 posts in 2783 days


#2 posted 09-30-2017 08:03 PM

Beautiful table Art!

View pintodeluxe's profile

pintodeluxe

5798 posts in 3019 days


#3 posted 09-30-2017 08:36 PM

Love that joinery! Beautiful table. Fine, fine work here.

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush

View Grumpymike's profile

Grumpymike

2336 posts in 2521 days


#4 posted 09-30-2017 08:44 PM

Wow! what great table. you were fortunate to find QSWO with such beautiful rays … Your supplier did well.
I like the tripod legs, with the thru tenons and wedge a true A&C style,

-- Grumpy old guy, and lookin' good Doin' it. ... Surprise Az.

View Alongiron's profile

Alongiron

649 posts in 2899 days


#5 posted 09-30-2017 08:51 PM

Beautiful grain pattern, love the finish, top notch craftsmanship, what’s not to love about this table! How are the chairs coming along?!?

-- Measure twice and cut once.....sneak up on it! Steve Lien

View JimYoung's profile

JimYoung

300 posts in 1793 days


#6 posted 09-30-2017 10:13 PM

Beautiful joinery.

-- -Jim, "Nothing says poor craftsmanship more than wrinkles in your duck tape"

View Monte Pittman's profile

Monte Pittman

30071 posts in 2544 days


#7 posted 09-30-2017 10:59 PM

Really nice work

-- Nature created it, I just assemble it.

View swirt's profile

swirt

3451 posts in 3178 days


#8 posted 10-01-2017 02:06 AM

Table design looks great. Wood looks awesome. Nice work.

-- Galootish log blog, http://www.timberframe-tools.com

View ColonelTravis's profile

ColonelTravis

1932 posts in 2100 days


#9 posted 10-01-2017 04:44 AM

Spectacular. Did you wipe that finish on or spray?

View AandCstyle's profile

AandCstyle

3179 posts in 2463 days


#10 posted 10-01-2017 11:21 AM

Thanks, everyone!

Mike, the table has 4 legs, one in back is hidden. I also posted a blog with more detail.

Steve, haha! You win the prize for guessing the next project. I have started the chairs, but they will take a while, I am hoping before Christmas, but don’t hold me to that.

Colonel, I wiped the Arm-R-Seal on. It goes very quickly and there were no issues with dripping or sagging.

-- Art

View helluvawreck's profile

helluvawreck

32087 posts in 3072 days


#11 posted 10-01-2017 01:05 PM

You did a very nice job on this table and the wood is wonderful.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View CaptainSkully's profile

CaptainSkully

1602 posts in 3764 days


#12 posted 10-01-2017 02:40 PM

Awesome Art, as usual! I’ve really missed your posts. I’m glad you’re back and thanks for taking the time to make the blog too.

-- You can't control the wind, but you can trim your sails

View splintergroup's profile

splintergroup

2437 posts in 1428 days


#13 posted 10-01-2017 02:58 PM

It’s a real beaut Art!

I thought it was a side table in the pictures, lack of scale in the background I suppose 8^)

You have a real talent for that QSWO and impressive joinery. Glad to see your putting your shuttered existence in the past and getting a-round to more Art-ful platforms!

(sorry, all I could come up with!)

View Mark's profile

Mark

973 posts in 2180 days


#14 posted 10-01-2017 03:42 PM

Well done Art. Beautiful job. Really like your the tenons and wedges. That really makes the piece.

-- Mark

View AandCstyle's profile

AandCstyle

3179 posts in 2463 days


#15 posted 10-01-2017 04:21 PM

Thanks, everyone.

Geez, Splint, the only reason I post these projects is to give you an outlet for your puns. Chairs will be next so please don’t sit on your laurels and start to arm yourself.

-- Art

showing 1 through 15 of 25 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com