LumberJocks

34 Hot Rod

  • Advertise with us
Project by SouthavenToyMaker posted 09-25-2017 05:56 PM 959 views 2 times favorited 21 comments Add to Favorites Watch

Well, here is my completed 34ish Ford Coupe convertible for the engine I previously posted, no plans used at all just drew out the shapes cut and adjusted sizes as needed. The front rack in pinion was functional until a clamp feel on it. I think it turned out okay. I used walnut, ash, cherry and pine (front grill has pine only scrap I could find with straight grain pattern) I traced the doors out with a pencil then went over them lightly with a straight blade. As always all comments are welcome good or bad.

-- Sean





21 comments so far

View jim65's profile

jim65

932 posts in 1715 days


#1 posted 09-25-2017 06:19 PM

Very cool, great design, love the engine details!

-- Jim, Marostica Italy

View GR8HUNTER's profile

GR8HUNTER

2751 posts in 494 days


#2 posted 09-25-2017 06:23 PM

this rod is super cool looking with that engine really makes it look GR8 ….that kinda sucks with the steering ….but it happens …ONLY thing I would have done different is put a finish on it to make it POP ….GREAT JOB :<))

-- Tony Reinholds,Pa. REMEMBER TO ALWAYS HAVE FUN

View majuvla's profile

majuvla

10820 posts in 2649 days


#3 posted 09-25-2017 08:15 PM

Outstanding choice of woods! Looks great, concerning it’s made without plans. I like that motor displayed without engine cover.

-- Ivan, Croatia, Wooddicted

View Dutchy's profile

Dutchy

2485 posts in 1950 days


#4 posted 09-25-2017 08:16 PM

I’m enjoying. Well done.

-- https://dutchypatterns.com/

View htl's profile

htl

2973 posts in 941 days


#5 posted 09-25-2017 08:40 PM

Great HOT ROD!!!
Take a picture with some cotton pulled out the back and make it a burn out king. LOL

-- There's a hundred ways to do anything, alot depends on the tools at hand.

View ralbuck's profile

ralbuck

3514 posts in 2048 days


#6 posted 09-25-2017 09:53 PM

SUPER NEAT!

This from a car freak!

-- SAWDUST is THERAPY without a couch! just rjR

View PaulDoug's profile

PaulDoug

1362 posts in 1485 days


#7 posted 09-25-2017 10:10 PM

You really did a great job!

-- “We all die. The goal isn't to live forever; the goal is to create something that will.” - Chuck Palahniuk

View LittleBlackDuck's profile (online now)

LittleBlackDuck

1219 posts in 602 days


#8 posted 09-25-2017 10:38 PM

Great job STM.

I’m no nitro sniffer, but, do you need steering for a linear drag race?... Don’t think you should fret… even in the bottom shot (pic #3) I couldn’t see any clamp damage!

PS. That’s why I keep telling everyone there’s no justification for clamps in a workshop...

-- If your first cut is too short... Take the second cut from the longer end... LBD

View meaded's profile

meaded

392 posts in 3489 days


#9 posted 09-25-2017 11:05 PM

I like it, nicely done

View Pjonesy's profile

Pjonesy

201 posts in 608 days


#10 posted 09-25-2017 11:34 PM

That is really great. Don’t know how you build things without plans. Well done

-- Peter New Zealand

View socrbent's profile

socrbent

510 posts in 2051 days


#11 posted 09-25-2017 11:50 PM

Great looker. I envy your skill.

-- socrbent Ohio

View Dave's profile

Dave

1 post in 25 days


#12 posted 09-26-2017 01:26 AM

Nicely done.

View SouthavenToyMaker's profile

SouthavenToyMaker

94 posts in 1270 days


#13 posted 09-26-2017 02:04 AM

WOW “Editor’s Choice” thank you Lumberjocks

-- Sean

View toolfooldan's profile

toolfooldan

52 posts in 1420 days


#14 posted 09-26-2017 10:35 AM

Too cool. Great job.

View crowie's profile

crowie

1955 posts in 1733 days


#15 posted 09-26-2017 10:51 AM

Just love it..
One can imagine cruising the streets in that beautiful ride….

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

showing 1 through 15 of 21 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com