LumberJocks

Shark attack

  • Advertise with us
Project by ralbuck posted 09-25-2017 12:03 AM 698 views 2 times favorited 15 comments Add to Favorites Watch
Shark attack
Shark attack No picture No picture No picture No picture No picture
Zoom Pictures

They are the CEO of openers!

Made from my pattern and unknown rescued pallet wood. The strings are rawhide for effect and also hanging.
One of them was tested the rest are waiting for final testing. R & D gets expensive!

-- SAWDUST is THERAPY without a couch! just rjR





15 comments so far

View Jerry's profile

Jerry

2448 posts in 1481 days


#1 posted 09-25-2017 01:15 AM

Good Job Buddy!

-- There are good ships and there are wood ships, the ships that sail the sea, but the best ships are friendships and may they always be. http://www.geraldlhunsucker.com/

View doubleDD's profile

doubleDD

6823 posts in 1876 days


#2 posted 09-25-2017 03:07 AM

Bite open a bottle, that’s the way to do it. Nice job.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View CFrye's profile

CFrye

9837 posts in 1672 days


#3 posted 09-25-2017 09:33 AM

I like ‘em!

-- God bless, Candy

View ZAGREB's profile

ZAGREB

766 posts in 1483 days


#4 posted 09-25-2017 09:55 AM

nice work

-- bambi

View hunter71's profile

hunter71

3035 posts in 3019 days


#5 posted 09-25-2017 10:19 AM

Send one over so I can try it out. Nice job man.

-- A childs smile is payment enough.

View bushmaster's profile

bushmaster

2482 posts in 2115 days


#6 posted 09-25-2017 10:52 AM

Very mean looking openers. Well done.

-- Brian - Hazelton, British Columbia

View oldrivers's profile

oldrivers

1188 posts in 1399 days


#7 posted 09-25-2017 11:08 AM

Vicious openers, I like them, job well done.

-- Soli Deo gloria!

View majuvla's profile

majuvla

11181 posts in 2700 days


#8 posted 09-25-2017 11:42 AM

Good design,very good idea.

-- Ivan, Croatia, Wooddicted

View  woodshaver Tony C   's profile

woodshaver Tony C

5529 posts in 3186 days


#9 posted 09-25-2017 12:41 PM

A Great set of Jaws! That’s how you get the job done! Nice Work!

-- St Augustine FL, Experience is the sum of our mistakes!

View helluvawreck's profile

helluvawreck

29085 posts in 2699 days


#10 posted 09-25-2017 01:00 PM

These make a nice pedant. Congratulations.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View Porchfish's profile

Porchfish

803 posts in 2365 days


#11 posted 09-25-2017 01:23 PM

clever design.

-- The pig caught under the fence is always the one doing all the squealing !

View WayneC's profile

WayneC

13751 posts in 3930 days


#12 posted 09-25-2017 04:10 PM

Cool Id.

-- We must guard our enthusiasm as we would our life - James Krenov

View ralbuck's profile

ralbuck

3691 posts in 2099 days


#13 posted 09-25-2017 05:26 PM

A big “Thank You” to everyone for the kind words.

Start with a shark outline and a little scissors or ?? modifications will work. Exact measurements are not needed. The thickness of the wood being used can vary also—hard woods can be thinner and work well. I have even made pine openers out of 3/4 inch scraps that work; just will have a shorter life.

This is a very easy project with a scrollsaw; could also be done on a bandsaw and then stack cut, I think. The mouth works best from about 5/16th opening to 3/8 or so. the length of the mouth between bottom jaw front and top jaw should extend out about 1/2 inch for the best leverage. The bottom jaw cut should be at about a 75 degree angle, higher is to hard to make fit the bottle and lower weakens the jaw too much. These are approximate figures from my development.

I will enjoy seeing your versions of the sharks!

-- SAWDUST is THERAPY without a couch! just rjR

View bushmaster's profile

bushmaster

2482 posts in 2115 days


#14 posted 09-25-2017 07:17 PM

good going number two man.

-- Brian - Hazelton, British Columbia

View Cliff 's profile

Cliff

1152 posts in 1556 days


#15 posted 09-26-2017 12:36 AM

Nice Work Ralph…

Regards,

Cliff.

-- Cliff Australia : Snoring is good. It blows away all the Sawdust.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com