LumberJocks

Easy to make modern desk lamp

  • Advertise with us
Project by pashley posted 09-06-2017 02:19 PM 2894 views 34 times favorited 13 comments Add to Favorites Watch
Easy to make modern desk lamp
Easy to make modern desk lamp No picture No picture No picture No picture No picture
Zoom Pictures

I wanted an easy to make modern desk lamp that had some unusual flair. In this case, it was the downward pointing ridges.

Made of mahogany. Uses an inexpensive LED puck light.

See the video! https://youtu.be/10WVT2W-6P0

I’m giving out the cutlist: http://bit.ly/2vKQ9XA

-- Have a blessed day! http://newmissionworkshop.com





13 comments so far

View sras's profile

sras

4941 posts in 3326 days


#1 posted 09-06-2017 02:46 PM

Nice design on this!

-- Steve - Impatience is Expensive

View a1Jim's profile

a1Jim

117328 posts in 3774 days


#2 posted 09-06-2017 02:52 PM

cool design

-- https://www.artisticwoodstudio.com/videos wood crafting & woodworking classes

View kiefer's profile

kiefer

5621 posts in 2864 days


#3 posted 09-06-2017 03:10 PM

Great looking lamp design !
I like the simplicity .

-- Kiefer https://www.youtube.com/user/woodkiefer1/videos

View pottz's profile (online now)

pottz

3502 posts in 1182 days


#4 posted 09-06-2017 03:59 PM

very sleek and modern look,i love that design.it could be made any size for use as a table lamp or used as lamps on night stands in a bedroom,lots of possibilities.thanks for sharing this,nice work.

-- sawdust the bigger the pile the bigger my smile-larry,so cal.

View Underdog's profile

Underdog

1223 posts in 2233 days


#5 posted 09-06-2017 04:11 PM

To fasten the top on, you could always use magnets..

This is a cool little project! Thanks for sharing!

-- Jim, Georgia, USA

View SawdustTX's profile

SawdustTX

291 posts in 2521 days


#6 posted 09-06-2017 06:20 PM

Stylish, Classy, and functional.

View helluvawreck's profile

helluvawreck

32087 posts in 3064 days


#7 posted 09-07-2017 11:33 AM

This is a very creative and beautiful lamp. Nice work!

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View Sheisserick's profile

Sheisserick

123 posts in 2043 days


#8 posted 09-07-2017 07:08 PM

I like this alot. Good job man

-- I doubt, therefore I might be

View JimYoung's profile

JimYoung

300 posts in 1784 days


#9 posted 09-07-2017 11:08 PM

Favorited.

-- -Jim, "Nothing says poor craftsmanship more than wrinkles in your duck tape"

View cebfish's profile

cebfish

156 posts in 2885 days


#10 posted 09-13-2017 03:29 PM

where did you buy the puck lights. the only ones I can find are 10 dollars apiece

View SignWave's profile

SignWave

451 posts in 3232 days


#11 posted 09-13-2017 07:13 PM

I really like the design of this lamp. Very nice!

-- Barry, http://BarrysWorkshop.com/

View wuddoc's profile

wuddoc

319 posts in 3915 days


#12 posted 10-07-2017 06:26 AM

Great looking lamp. I hope to do mine in Teak with a Gaboon top and bottom. Thanks for such a creative touch.

-- Wuddoc

View BobFrankly's profile

BobFrankly

18 posts in 1181 days


#13 posted 11-15-2017 04:37 PM

Nice design, was not expecting those backing boards to be the pieces that hold it all together. Magnets (as someone else mentioned) or dowels to hold the top on are definite options, I’ll probably end up making this later on :D

-- BobFrankly, California

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com