LumberJocks

Table Saw Jig Using Fence & Miter Gauge at same time

  • Advertise with us
Project by MNBsr posted 09-03-2017 03:41 PM 2865 views 0 times favorited 7 comments Add to Favorites Watch

Table Saw Jig—For using the Fence and Miter Gauge at the same time for Safety cutting pieces with length longer than width. Piece #1 is exactly 1” thick so it is easy to add the 1” to your cutting dimension. Start by planning piece #1 down to exactly 1” thick, then plane piece #2 to 1/2” thick or slightly less than this dimension is on your fence. Then cut piece #3 to 2-5/8” wide. (Note all pieces are 8” long. but this dimension suite to fit). Drill a 5/16 inch hole at location shown for the T-Slot bolt into pieces #2 & #3. Cut a recess for the T-Slot bolt in piece #2. Put all together with T-Slot bolt in place and add glue between piece #1 & #2. Clamp and let dry. The Jig is easy on and off. Just remember to add 1” to all dimensions when using this Jig. After using a few days I decided to add 2 5/16 dowels to keep part 3 in place and also I added a spring between part 2 & 3. And for you die hard I added a picture of another way of achieving the same purpose.

-- Malcolm, Mobile Alabama





7 comments so far

View TheFridge's profile (online now)

TheFridge

9854 posts in 1567 days


#1 posted 09-03-2017 04:45 PM

I’m confused? It slides on the fence?

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View MNBsr's profile

MNBsr

89 posts in 1947 days


#2 posted 09-03-2017 04:51 PM

No it Clamps on Fence, You set the length of Cut on it and as you slide miter forward the stock slides off of jig and you free cut (but to correct length) and you have no worry about kickback, See photo 2.

-- Malcolm, Mobile Alabama

View socrbent's profile

socrbent

616 posts in 2351 days


#3 posted 09-03-2017 09:58 PM

Looks like this simple jig would be effective. Good thinking.

-- socrbent Ohio

View TheDane's profile

TheDane

5492 posts in 3744 days


#4 posted 09-04-2017 01:32 AM

Looks like there is more than one way to skin this cat …
Click for details

-- Gerry -- "I don't plan to ever really grow up ... I'm just going to learn how to act in public!"

View cabmaker's profile

cabmaker

1738 posts in 2890 days


#5 posted 09-04-2017 12:15 PM

Sorry gentilemen…..you guys are about 45 yrs late on this one….that i know of

View helluvawreck's profile

helluvawreck

31984 posts in 2948 days


#6 posted 09-04-2017 12:17 PM

Malcolm, this is a very nice jig and is certainly a fine addition to your shop.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View oldnovice's profile

oldnovice

7016 posts in 3449 days


#7 posted 09-05-2017 02:40 AM

I have those clamps which come in handy for what you described, also for mounting my tall fence, and for a sacrificial fence to my TS fence.

-- "I never met a board I didn't like!"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com