Box Cover

  • Advertise with us
Project by vidkid26 posted 06-18-2010 08:38 PM 1857 views 5 times favorited 11 comments Add to Favorites Watch

This is a tissue box cover I made for the podium at church. The top and inlay are canary wood. I’m not sure what the dark wood is. It was a scrap from an abandoned project.

11 comments so far

View Jonathan's profile


2608 posts in 2957 days

#1 posted 06-18-2010 08:57 PM

Nice. Makes me want to sneeze so I have to grab a tissue from it. ;)

Is anyone else thinking the mystery wood is some sort of mahogany here, or am I way off?

-- Jonathan, Denver, CO "Constructive criticism is welcome and valued as it gives me new perspectives and helps me to advance as a woodworker."

View Cozmo35's profile


2200 posts in 2943 days

#2 posted 06-18-2010 09:04 PM

Very nice project, good segmentation…

Jonathan, I think you’re right. It does look like a Mahogany.

-- If you don't work, you don't eat!.....Garland, TX

View donjoe's profile


1360 posts in 2938 days

#3 posted 06-19-2010 02:32 AM

Great project. The cover looks nice.

-- Donnie-- listen to the wood.

View a1Jim's profile


116906 posts in 3484 days

#4 posted 06-19-2010 02:55 AM

Thats a good one nice work.

-- Custom furniture

View sandt38's profile


166 posts in 2815 days

#5 posted 06-19-2010 04:03 AM

Cool idea, and well executed.

-- Got Wood? --- Somewhere along the way the people in Washington forgot that they are there to represent the people, not to rule them.

View Beginningwoodworker's profile


13347 posts in 3580 days

#6 posted 06-19-2010 05:45 AM

Nice looking box.

View Mary Anne's profile

Mary Anne

1058 posts in 3115 days

#7 posted 06-19-2010 05:50 AM

Very nice. I like the soft corners and satiny finish.

View lanwater's profile


3111 posts in 2841 days

#8 posted 06-19-2010 06:47 AM

Very cute box.

-- Abbas, Castro Valley, CA

View Jim Crockett (USN Retired)'s profile

Jim Crockett (USN Retired)

852 posts in 3640 days

#9 posted 06-19-2010 07:54 PM

Very, very nice – I like it! Do I detect a slight rise to the cover and, if so, how did you accomplish this? Also, what was the thickness of the wood – I’ve made some covers for the smaller boxes and have used 5/16” and 3/8” thickness but was just wondering what you used on this beautiful box.


-- A veteran is someone who, at one point in his/her life, wrote a blank check made payable to "The United States of America," for an amount of "up to and including his/her life".

View vidkid26's profile


74 posts in 3223 days

#10 posted 06-20-2010 04:44 AM

Thanks everyone.
I used a raised panel bit with the back cutter removed on the top, to get the raised part and then a 1/8 round over bit all around the smooth out the rough look. Its finished with tung oil. The top is 3/4”. it was made thick so I could use the panel bit. The thickness where it attaches to the top is about 3/8”. The sides are 1/2”.

View NormG's profile


5901 posts in 2911 days

#11 posted 06-20-2010 07:45 AM

I love the lines of the top

-- Norman - I never never make a mistake, I just change the design.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics