|Project by Chuck41586||posted 06-17-2010 12:09 AM||1206 views||0 times favorited||1 comment|
These shelves were alot of fun to do. The sides were done out of 3/4 maple hardwood while the shelves and nailers were done out of 3/4 maple ply. It has a six degree pitch on it be larger at the bottom than the top. The customer didnt want to have a solid back on it so the sturdyness of these are questionable since there is not much holding this all together. The shelves were only glued and pin nailed on with little blocks glued underneath for added support. These did come as a pair and soon I will have pictures of them after install. The finish was done with a mix of cherry and some purple stuff the customer found and liked. All Clear coated with a conversion varnish.
-- May the Lord be with you.