LumberJocks

Box

  • Advertise with us
Project by LARRYIA posted 08-16-2017 09:41 PM 829 views 0 times favorited 5 comments Add to Favorites Watch

This is a box that I made. It’s made with Walnut used box joints and with a wooden hinge.
I used a CNC to carve the rose in the top of the box. Put a tray in the inside with felt in try and
in the bottom. I use a wooden hinge on most of the box’s I build. I don’t like to mortise hinges
so I worked on using wooden hinge it took a few try’s but I finally got it. Built a special router table
just to do the hings. Finish the box with about 5 coats of wipe on poly.

-- LARRY





5 comments so far

View Jim Jakosh's profile (online now)

Jim Jakosh

20922 posts in 3190 days


#1 posted 08-16-2017 11:04 PM

Beautiful box with nice looking joints!!

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View Sawdustaflyin's profile

Sawdustaflyin

10 posts in 729 days


#2 posted 08-17-2017 02:27 AM

Very nice work Larry.. Curious to know how you did your hinge?

View helluvawreck's profile

helluvawreck

31994 posts in 2951 days


#3 posted 08-17-2017 04:04 PM

You did a beautiful job on this box and the wood is very nice.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View NormG's profile

NormG

6216 posts in 3088 days


#4 posted 08-19-2017 03:21 PM

Nice looking box

-- Norman - I never never make a mistake, I just change the design.

View JimInNM's profile

JimInNM

305 posts in 1301 days


#5 posted 08-21-2017 07:15 PM

Very nice, your wood hinges are fantastic

-- JimInNM........Space Case

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com