LumberJocks

6 Panel 3D Triptic

  • Advertise with us
Project by Nic posted 08-13-2017 03:01 PM 709 views 2 times favorited 5 comments Add to Favorites Watch

CNC Project. 1/8 inch mdf, layered panels. Poplar frame. Painted and pin nailed together.





5 comments so far

View helluvawreck's profile

helluvawreck

28163 posts in 2644 days


#1 posted 08-13-2017 07:54 PM

This is very nice.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View swirt's profile

swirt

2347 posts in 2750 days


#2 posted 08-14-2017 01:15 AM

Nice. It has a very calming appearance.

-- Galootish log blog, http://www.timberframe-tools.com

View WhereDidIPutThat's profile

WhereDidIPutThat

25 posts in 1114 days


#3 posted 08-14-2017 02:25 PM

How hard is it to hang that in alignment?

-- palette wood connoisseur

View Nic's profile

Nic

108 posts in 3250 days


#4 posted 08-14-2017 08:43 PM

Depends on how you do it. I did alligator hooks on previous ones and I had to measure, re-measure, and still be off by 1/16 of an inch which will drive you nuts. Then I wrap painters tape around the screw head to level them out. But this particular frame, I havent hung yet. I am planning on using a 3M product, command damage free haninging. It holds up to 12 lbs. the frames are much lighter than that, I plan on getting a 2×4 for the straight line then letting the 3M command tape do its job. I’ll let you know how it goes. My concern is it is going into the bathroom and the steam will loosen the tape, but if it works, this should be the way to go from here on out.

View Nic's profile

Nic

108 posts in 3250 days


#5 posted 08-22-2017 02:57 AM

I used the 3M command strips. plenty of power to hold them up. A little time setting them up. It would have helped if I had spent more time squaring up the frames when I built them. But it went up ok. I would recommend the command strips for hanging lighter frames.
https://s3.amazonaws.com/vs-lumberjocks.com/ov2g6i5.jpg!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com