Pig Serving Tray

  • Advertise with us
Project by Gregg M. posted 07-13-2017 07:16 PM 1278 views 0 times favorited 5 comments Add to Favorites Watch

I made this serving tray for a friend based on something he had seen at a party. The pig is made out of 8/4 walnut and is about 34” L x 18” W. It is big. The finish is Howard’s Butcher Block Conditioner. To keep the tail stiff, I poured epoxy over it and left it to soak in. I used a dowel and rubber band to keep its shape while the epoxy set.

-- Marvel Woodworking, West Chester, PA -

5 comments so far

View GR8HUNTER's profile (online now)


5133 posts in 914 days

#1 posted 07-13-2017 08:25 PM

this little piggy stayed home ….GREAT JOB :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View woodify's profile


322 posts in 2274 days

#2 posted 07-13-2017 09:01 PM

I like that you used a different wood for the eye and rope for a tail. Great job

-- Woodify ~~

View Jim Jakosh's profile

Jim Jakosh

21737 posts in 3307 days

#3 posted 07-14-2017 02:39 AM

Neat tray,Gregg!!

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View dannmarks's profile


721 posts in 784 days

#4 posted 07-14-2017 02:55 AM

I just think it is fun.

View helluvawreck's profile


32087 posts in 3069 days

#5 posted 07-14-2017 02:48 PM

I think this pig tray turned out nicely.

helluvawreck aka Charles

-- helluvawreck aka Charles,

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics