LumberJocks

My first built and first sold cutting boards

  • Advertise with us
Project by Campeasy posted 07-04-2017 07:45 PM 717 views 0 times favorited 4 comments Add to Favorites Watch

I had been wanting to build an end grain board for a long time but when i finished sanding these i decided they were done. No need to cut them apart.





4 comments so far

View John's profile

John

955 posts in 1085 days


#1 posted 07-05-2017 12:15 AM

Beautiful boards, hope I can do as well some day.

-- John, Sunshine Coast, BC, Canada.

View fogbow's profile

fogbow

70 posts in 400 days


#2 posted 07-06-2017 03:57 PM

Nice job. What type of finish did you use? Welcome to Lumberjocks.

Barbara

View dalepage's profile

dalepage

308 posts in 656 days


#3 posted 07-07-2017 02:11 AM

I encourage you to watch a uTube video on making end grain boards. You have virtually endless design possibilities depending on how your first glue-up is positioned and how you roll and/or swap ends with the pieces after crosscutting the first glue-up.

Also, the end grain’s characteristic of soaking up the oil gives a richer color than face grain.

Just my opinion, but I’d never make a face grain board again.

-- Dale

View Campeasy's profile

Campeasy

28 posts in 143 days


#4 posted 07-07-2017 04:22 AM

Thanks Dale, I built these about a year ago. I personally like to mix edge grain, like these, and end grain but i will occasionally use the face grain if i like the pattern. Both cuts have unique features and if a face grain cutting board, like the one ive been using for 15 years, will hold up that long, i see no harm in using whatever cut looks best.
Barbara, thank you. I use mineral oil and pure white bees wax. Heated and mixed 6:1 mineral oil :wax

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com