LumberJocks

Peppermill from Zebrawood

  • Advertise with us
Project by BenDupre posted 06-29-2017 04:48 AM 1003 views 1 time favorited 11 comments Add to Favorites Watch

Turned this up out of a zebrawood blank. Kit comes from Rockler but you can get grinders just about anywhere.

-- The problem with communication is the illusion that it has occurred. – George Bernard Shaw





11 comments so far

View John's profile

John

1231 posts in 1411 days


#1 posted 06-29-2017 06:12 AM

Nice looking grinder Ben, can you make one where the ground pepper comes out the top?

-- John, Sunshine Coast, BC, Canada.

View Jim Jakosh's profile

Jim Jakosh

21284 posts in 3247 days


#2 posted 06-29-2017 10:59 AM

Very attractive mill!!

Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View  woodshaver Tony C   's profile

woodshaver Tony C

6174 posts in 3494 days


#3 posted 06-29-2017 12:04 PM

Good looking grinder Ben, nice finish too!

-- St Augustine FL, Experience is the sum of our mistakes!

View BenDupre's profile

BenDupre

678 posts in 629 days


#4 posted 06-29-2017 12:12 PM



Nice looking grinder Ben, can you make one where the ground pepper comes out the top?

- John

I might try that John if i could find a kit. Do you know who makes a kit for that?

-- The problem with communication is the illusion that it has occurred. – George Bernard Shaw

View doubleDD's profile

doubleDD

7699 posts in 2185 days


#5 posted 06-29-2017 12:38 PM

Great job on this Ben. Really like the zebrawood. I made one out of marblewood and I can’t get over the similar grain pattern with the zebrawood.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View ZAGREB's profile

ZAGREB

1018 posts in 1791 days


#6 posted 06-29-2017 03:37 PM

nice work Ben
I´like to make one but i can´find a kit in hereif you know at net any link for quality kit i´ll be grateful

-- bambi

View helluvawreck's profile

helluvawreck

32083 posts in 3008 days


#7 posted 06-29-2017 03:59 PM

This is a beautiful peppermill.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View BenDupre's profile

BenDupre

678 posts in 629 days


#8 posted 06-29-2017 04:01 PM



nice work Ben
I´like to make one but i can´find a kit in hereif you know at net any link for quality kit i´ll be grateful

- ZAGREB

Bambi – here are a few

https://www.pennstateind.com/mm5/merchant.mvc?Screen=SEARCH&q=Peppermill

https://www.woodturnerscatalog.com/search?term=Mill

https://www.woodcraft.com/search?q=Pepper+Mill&button=search

Most of these kits are going to require certian size fostner bits and possibly an extension. And a chuck for the tailstock.

The kit i used requires a 1-1/16 for the main bore, which is hard to come by, but you can do it with a 1 inch. Then pare out a 1/4 wide slot for the retainer bracket in the bore.

Good luck! Love to see it when you make one.

-- The problem with communication is the illusion that it has occurred. – George Bernard Shaw

View Jerry's profile

Jerry

2834 posts in 1790 days


#9 posted 06-29-2017 06:00 PM

Great work Ben, You need a Salt grinder to go along with it!

-- There are good ships and there are wood ships, the ships that sail the sea, but the best ships are friendships and may they always be. http://www.geraldlhunsucker.com/

View John's profile

John

1231 posts in 1411 days


#10 posted 06-30-2017 06:03 AM

Hey Ben, I’ve never made a grinder but I looked it up at Lee Valley and they have that type. Like they say in the info the top discharge keeps your table cloth clean. I just might pick up the kit and give it a try.

-- John, Sunshine Coast, BC, Canada.

View m00nspeell's profile

m00nspeell

1 post in 454 days


#11 posted 07-18-2017 01:15 PM

very nice!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com