LumberJocks

Work Smart 3005

  • Advertise with us
Project by TheTurtleCarpenter posted 06-19-2017 08:47 PM 2113 views 16 times favorited 19 comments Add to Favorites Watch

This is a swing frame I made for my Worksharp 3000. I had seen a video where someone had used a box fan motor and these cheap 6” diamond jewelry disc and kept the tool rest at horizontal to grind with. There is a locating pin in the left side for relocating most used angles. The top rest plate slides forwards and back to keep it close to the blade.

I started this over the weekend and this is the third setup and works very well. I have a Wixey angle gauge coming so I can click it onto the metal disc and get accurate angles in the future. I really think this setup will be my go to for future sharpening.


Thanks for Looking !

-- "Tying shoelaces was way harder than learning to Whistle",,,,,member MWTCA area K. Kentucky





19 comments so far

View robscastle's profile

robscastle

4109 posts in 1920 days


#1 posted 06-19-2017 09:16 PM

Very clever, I take it you are using the vyce grips to lock the required swing angle?

Hey I have spotted a belt driving something homemade to the right,..... is that a bufffing pad? ....I tried to find out myself by having a snoop around in your workshop,... but the door was locked and I could not get in, ...plus the windows were covered.

-- Regards Robert

View TheTurtleCarpenter's profile

TheTurtleCarpenter

922 posts in 782 days


#2 posted 06-19-2017 09:38 PM

Yes Robert. The vice grips are temporary till I get the Wixey gauge and then I will use the locating hole on the left and drill thru to locate angles. Come on over and knock on the window and I’ll show you around.

-- "Tying shoelaces was way harder than learning to Whistle",,,,,member MWTCA area K. Kentucky

View EricLew's profile

EricLew

149 posts in 1082 days


#3 posted 06-19-2017 11:30 PM

An ingenious design, James Hamilton would be impressed. :-)
Very nice work

-- I love the smell of coffee in the morning, and sawdust in the afternoon

View TheTurtleCarpenter's profile

TheTurtleCarpenter

922 posts in 782 days


#4 posted 06-19-2017 11:59 PM

Stumpy would be done and drinking a cold one before I got the first prototype done.

-- "Tying shoelaces was way harder than learning to Whistle",,,,,member MWTCA area K. Kentucky

View Rick M's profile

Rick M

9911 posts in 2096 days


#5 posted 06-20-2017 01:38 AM

View waho6o9's profile

waho6o9

7918 posts in 2293 days


#6 posted 06-20-2017 02:01 AM

Bravo

A round of applause for Turtle please.

Well done Sir

View kiefer's profile

kiefer

5380 posts in 2383 days


#7 posted 06-20-2017 02:33 AM

Love it !
Hope you post the finished project soon .
Where did you get the diamond disc ?

-- Kiefer https://www.youtube.com/user/woodkiefer1/videos

View TheTurtleCarpenter's profile

TheTurtleCarpenter

922 posts in 782 days


#8 posted 06-20-2017 03:21 AM

Thanks guys, here is a link for the disc. http://www.ebay.com/itm/Grit-500-Diamond-coated-6-inch-Flat-Lap-wheel-Lapidary-grinding-polishing-wheel/121084916883?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

-- "Tying shoelaces was way harder than learning to Whistle",,,,,member MWTCA area K. Kentucky

View woodbutcherbynight's profile

woodbutcherbynight

3175 posts in 2125 days


#9 posted 06-20-2017 03:57 AM



Stumpy would be done and drinking a cold one before I got the first prototype done.

- TheTurtleCarpenter

ROFLMAO, I feel ya on that one. And Norm always manages to get things done and ready for use in 30 min.

-- Live to tell the stories, they sound better that way.

View TheTurtleCarpenter's profile

TheTurtleCarpenter

922 posts in 782 days


#10 posted 06-20-2017 05:41 AM

Klaus, when I get thru tweaking it I’ll do a blog post and break the parts down to size for anyone with a Worksharp that might want to replicate it. Getting the pivot point right was the hardest part, all the rest can be changed to suit the function of tools that you will sharpen. The 90 fence comes off and is attached with dowels but I think it could pivot for angle also for compound grinds. Thanks for looking !

-- "Tying shoelaces was way harder than learning to Whistle",,,,,member MWTCA area K. Kentucky

View eddie's profile

eddie

8565 posts in 2330 days


#11 posted 06-20-2017 08:48 AM

cleaver ,great set up

-- Jesus Is Alright with me

View robscastle's profile

robscastle

4109 posts in 1920 days


#12 posted 06-20-2017 09:17 AM

Sorry Turtle and Waho6o9 I couldnt resist after reading your post!

-- Regards Robert

View helluvawreck's profile

helluvawreck

27177 posts in 2583 days


#13 posted 06-20-2017 11:46 AM

You did a fine job on this system and it’s a fine addition to your shop.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View HokieKen's profile (online now)

HokieKen

3587 posts in 855 days


#14 posted 06-20-2017 11:49 AM

Well holy hell Turtle, ain’t that just slicker than eel snot?! I recently picked up a WS 3000 and I’ve been putting off building a stand/cabinet because I wanted to scour the interwebs and see what kind of brilliance others had come up with. Never seen anything like this though! I’ll be following looking anxiously for the blog post!

-- Kenny, SW VA, Go Hokies!!!

View CL810's profile (online now)

CL810

3650 posts in 2704 days


#15 posted 06-20-2017 03:36 PM

Clever, favorited. Looking forward to your blog.

-- "The only limits to our realization of tomorrow will be our doubts of today." - FDR

showing 1 through 15 of 19 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com