or Join Now!
Hi, this is from my sisters tree, just a very small bowl, it’ Hackberry with the Watco finishing products, light walnut danish oil and a wipe on poly.
home | projects | blog
393 posts in 2021 days
Preview this project card
113725 posts in 2617 days
#1 posted 05-25-2010 04:27 AM
I like it so nice.
-- http://artisticwoodstudio.com Custom furniture
1757 posts in 2458 days
#2 posted 05-25-2010 04:33 AM
Good looking bowl Ron !!!! I like the figure in this.
-- Mike, Missouri --- “A positive life can not happen with a negative mind.” ---
#3 posted 05-25-2010 05:25 AM
thanks, Iv’e got a natural edge bowl I’m doing and I hope it don’t crack on me, because I think its one of my favorites so far.
109 posts in 2569 days
#4 posted 05-25-2010 06:20 AM
It looks so much like Oregon ash!
-- rustic andy
4237 posts in 2169 days
#5 posted 05-25-2010 06:23 AM
Nice turning! Good to see your name and date. I need to do that more often. I’m starting to forget when I made some things.
-- Steve - Impatience is Expensive
#6 posted 05-25-2010 07:16 AM
Really is nice wood, does warp a lot, but it does have some nice grain, especiall with a stain to bring it out.
#7 posted 05-25-2010 07:22 AM
yes, I’m also gonna go back and change the name on all my pic files before my library gets to far gone.
2692 posts in 2116 days
#8 posted 05-25-2010 12:32 PM
Nice bowl! I have some hackberry in the shop my father in-law gave me a while back and he was sure to give me the “Warning” on how difficult it is to work with. I haven’t had a chance to mess with it much and was wondering if you ran into any issues? I do know it is very hard.
I too really love the look of this wood. Hope what ever I decide to do looks as well as yours.
-- Dan ~ Texarkana, Tx.
2427 posts in 2226 days
#9 posted 05-25-2010 12:47 PM
Pretty wood, but it can give you fits working it. Nice job
-- A childs smile is payment enough.
2066 posts in 2104 days
#10 posted 05-25-2010 01:11 PM
I like the bowl. Hackberry is very hard wood. The guy where I got my rough lumber,at the mill close to me. He has a piece of spalted hackberry. I’ve been trying to talk him out of it. He said his TS couldn’t cut it. I just think his blade was way to dull though.
-- Tim, Missouri ....Inside every older person is a younger person wondering what the heck happened
#11 posted 05-25-2010 11:38 PM
Answer to Maveric, Well, it was green wood so it cut pretty easy, I’m really knew to this stuff so I can’t really tell You if the tearout was bad compared to other woods but I can tell You this wood warps a lot, Iv’e been trying microwaving my wood now as I did with this piece and just allowed enough material after the rough turn to return after it had warped from drying.
#12 posted 05-25-2010 11:41 PM
I have another piece of the same tree and have rough turned it and it has speckles in it, I think it will look nice after it is finished, but this piece did start to crack in the microwave process, so quit microwaving it and glued the crack with superglue and put it in bag to dry the rest of the way.
#13 posted 05-25-2010 11:49 PM
I don’t know Eagle, but I can’t imagine any saw not being able to cut it. It’s not made of stone or anything, plus like I said it was green wood. I just cut it with my chainsaw and then roughed it out on the band saw, no problems there.
187 posts in 2021 days
#14 posted 05-26-2010 01:04 AM
Ron very nice bowl, well designed and superb finish. great job!
-- Jeff, Missouri ,"Just because your not bleeding, dont mean your turning safely!"..............http://www.4woodturning.com
Go to Pulse page »
©2015 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics