LumberJocks

Dedicated edge jointer

  • Advertise with us
Project by TheTurtleCarpenter posted 06-13-2017 06:47 PM 1872 views 11 times favorited 20 comments Add to Favorites Watch

I wanted a dedicated jointer for edge work for some time and finally gathered enough material to make one. Thanks goes out to my neighbor Brian for the gift of a beautiful quartersawn blank of Brazillian Cherry. A little mix of woods and texture added to the cherry blank. I had a few small pieces of ebony for the pressure cap and screw but didn’t have enough for the handle and fence so I made those from walnut and ebonized them for contrast.

Thanks for looking and Happy Woodworking.!

-- "Tying shoelaces was way harder than learning to Whistle",,,,,member MWTCA area K. Kentucky





20 comments so far

View jim65's profile

jim65

990 posts in 1838 days


#1 posted 06-13-2017 07:18 PM

Beautiful!!!

-- Jim, Marostica Italy

View kiefer's profile

kiefer

5618 posts in 2572 days


#2 posted 06-13-2017 08:43 PM

Beautiful plane you made almost too nice to use but it will make you happy every time you use it !!!!!

Klaus

-- Kiefer https://www.youtube.com/user/woodkiefer1/videos

View TheWoodYogi's profile

TheWoodYogi

273 posts in 1342 days


#3 posted 06-13-2017 09:03 PM

I can only repeat what Jim65 said ‘Beautiful!!!’

-- Wood Yogi - Put your heart, mind, and soul into even your smallest acts. This is the secret of success. - Swami Sivananda

View fivecodys's profile

fivecodys

910 posts in 1541 days


#4 posted 06-13-2017 09:48 PM

Wow! That is a beauty!

-- The less an idiot knows, the louder he seems to know it!

View Don W's profile (online now)

Don W

18605 posts in 2472 days


#5 posted 06-13-2017 09:54 PM

fantastifc

-- http://timetestedtools.net - Collecting is an investment in the past, and the future.

View CFrye's profile

CFrye

10038 posts in 1745 days


#6 posted 06-13-2017 10:11 PM

WOW!

-- God bless, Candy

View robscastle's profile

robscastle

4787 posts in 2109 days


#7 posted 06-13-2017 10:20 PM

It that a turtle Vise I almost see there?

-- Regards Robert

View TheTurtleCarpenter's profile

TheTurtleCarpenter

1006 posts in 971 days


#8 posted 06-13-2017 11:52 PM

I appreciate all your comments !

Robert, the vise is a Wilton with an enclosed lead screw .

Klaus, It dials in real nice with the Veritas slow adjuster that I bought. What makes me happy is that it functions well and I’ve only got about $25 into it. The adjuster was $15 and the 3/8 brass was $8. The blade came with a plane I bought and resold. The chipbreaker I had and cut down to match the blade.

-- "Tying shoelaces was way harder than learning to Whistle",,,,,member MWTCA area K. Kentucky

View rtbrmb's profile

rtbrmb

607 posts in 2293 days


#9 posted 06-14-2017 01:16 AM

Turtle;

Boy this shoots to near the top of my want list-awesome.

What are the dimensions of the plane and what angle do you have the blade bedded at?

Thanks for sharing.

Bill in MI

View BenDupre's profile

BenDupre

567 posts in 393 days


#10 posted 06-14-2017 01:42 AM

Blown away!

-- The problem with communication is the illusion that it has occurred. – George Bernard Shaw

View TheTurtleCarpenter's profile

TheTurtleCarpenter

1006 posts in 971 days


#11 posted 06-14-2017 01:55 AM



Turtle;

Boy this shoots to near the top of my want list-awesome.

What are the dimensions of the plane and what angle do you have the blade bedded at?

Thanks for sharing.

Bill in MI

- rtbrmb

Bill, the plane is 2 5/8 X 23 with a 50 degree bed angle. Blade is a Veritas 2” A2

-- "Tying shoelaces was way harder than learning to Whistle",,,,,member MWTCA area K. Kentucky

View woodify's profile

woodify

288 posts in 1977 days


#12 posted 06-14-2017 02:11 AM

Thanks for sharing the measurements. This is on my wish to make list :)

Turtle;

Boy this shoots to near the top of my want list-awesome.

What are the dimensions of the plane and what angle do you have the blade bedded at?

Thanks for sharing.

Bill in MI

- rtbrmb

Bill, the plane is 2 5/8 X 23 with a 50 degree bed angle. Blade is a Veritas 2” A2

- TheTurtleCarpenter


-- Woodify ~~ https://www.youtube.com/woodified?sub_confirmation=1

View Tim Dahn's profile

Tim Dahn

1565 posts in 3470 days


#13 posted 06-14-2017 09:21 AM

Looks fantastic, nice curves. The Veritas blade adjuster I’m sure makes it easy to dial in.

Is the body glued up Krenov style?

-- Good judgement comes from experience and experience comes from poor judgement.

View helluvawreck's profile

helluvawreck

30129 posts in 2771 days


#14 posted 06-14-2017 11:51 AM

Wow! Nice work! It’s a very nice project and a fine addition to your shop.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View Smitty_Cabinetshop's profile

Smitty_Cabinetshop

15103 posts in 2523 days


#15 posted 06-14-2017 12:00 PM

Completely awesome, I’m blown away! How did you get that ‘stippled’ finish in the relief portion of the fence? It looks incredible!

-- Don't anthropomorphize your handplanes. They hate it when you do that. -- OldTools Archive --

showing 1 through 15 of 20 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com