LumberJocks

Drill Accessories Cabinet

  • Advertise with us
Project by retArch posted 06-09-2017 09:00 PM 637 views 6 times favorited 7 comments Add to Favorites Watch

I got tired of looking in four different places in the shop when I needed something drill related, and I had some cherry left over from my last project, and after a little bit of shuffling, the needed wall space. This is the result.

-- Old Architect, Cedar Hills





7 comments so far

View papadan's profile

papadan

2917 posts in 3036 days


#1 posted 06-09-2017 09:02 PM

Nice cabinet, I might steal your idea.

-- Artificial intelligence is no match for natural stupidity!

View TheWoodYogi's profile

TheWoodYogi

195 posts in 1105 days


#2 posted 06-09-2017 09:23 PM

Very neat and looks great :)

-- Wood Yogi - Put your heart, mind, and soul into even your smallest acts. This is the secret of success. - Swami Sivananda

View robscastle's profile

robscastle

3929 posts in 1872 days


#3 posted 06-09-2017 09:24 PM

Nice work on tthe cabinet! I wondered why you would be looking in four different locations, so I checked out my own situation without going into any embarrasing detail its worse!. like about double.

Now a couple questions what is the electrical device with some notes above it next to the cabinet.

Will you be able to find your roller stands now?

-- Regards Robert

View retArch's profile

retArch

11 posts in 64 days


#4 posted 06-09-2017 09:45 PM

Robscastle,

I still need to add a couple of rows to the left-hand door, but it is 98 degrees and we have company.

The electrical device is my irrigation system controller (and the notes are instructions and the color coding for the wiring).

The roller stand had to move to between the garage doors (and is actually easier to reach now). If I live long enough, this shop is finally going to be organized!

-- Old Architect, Cedar Hills

View robscastle's profile

robscastle

3929 posts in 1872 days


#5 posted 06-09-2017 10:12 PM

Very good, thats my curiosity satisfied for the moment, its a bit cooler here..

Opps no its not where is your drill doctor?

-- Regards Robert

View pottz's profile

pottz

1628 posts in 652 days


#6 posted 06-09-2017 11:12 PM

i had the same problem until i made a cabinet for under my drill press.used to dig through a drawer full of bits and never knew if i had the size i needed,once organized discovered i had 2-3 of the same sizes!every shop needs a bit cabinet.nice work and welcome to lumber jocks.

-- sawdust the bigger the pile the bigger my smile-larry,so cal.

View BurlyBob's profile

BurlyBob

4516 posts in 1933 days


#7 posted 06-13-2017 04:09 AM

That’s a really great looking cabinet. Looks like a great solution. Only wish I had enough wall space to copy it for my needs.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com