|Project by lumberdog||posted 05-17-2010 03:26 PM||1703 views||0 times favorited||7 comments|
I had a few pieces of 3/4” cherry and some maple laying around and finally decided what i was going to do with it. and this is what i come up with. Legs and aprons are attached with mortise and tenon joinery, i also put in corner bracing. Top is attached with clips that are set in a dado, cut on inside of the aprons.
It is finished with three coats of rubbed in linseed oil and paste wax. It measures 19”D x 271/2”W x 22”H
-- Lumberdog.. Morley, Michigan