LumberJocks

Oak low table

  • Advertise with us
Project by Boris Beaulant posted 05-11-2017 07:38 AM 866 views 1 time favorited 10 comments Add to Favorites Watch

Here is a low table made of oak.

This table uses the same technic than my previous Desk top veneer with my plunge saw.

And a small video of its build.

https://youtu.be/GIIFsQSnvIk

You can download the plan by clicking on the following picture and after the big Orange button.





10 comments so far

View Fiddy's profile

Fiddy

108 posts in 1088 days


#1 posted 05-11-2017 03:53 PM

Just checked out your video – impressive tools, but more importantly though, impressive skills to use them. Great job!

View Boris Beaulant's profile

Boris Beaulant

93 posts in 2103 days


#2 posted 05-11-2017 04:48 PM

Thank you Fiddy !

View majuvla's profile

majuvla

10805 posts in 2645 days


#3 posted 05-11-2017 04:57 PM

Outstanding top design. I bet you have lot of strong nervs to do such job.

-- Ivan, Croatia, Wooddicted

View helluvawreck's profile

helluvawreck

28163 posts in 2644 days


#4 posted 05-11-2017 06:25 PM

This table turned out nicely.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View madts's profile

madts

1799 posts in 2117 days


#5 posted 05-11-2017 06:41 PM

Wonderful Table. Great execution.

How thick is the veneer?

—Madts.

-- Thor and Odin are still the greatest of Gods.

View Quikenuff's profile

Quikenuff

61 posts in 647 days


#6 posted 05-12-2017 01:26 AM

Very nice design and well done. I noticed in your video that you made a pattern for curved detail along the underside edges of the top, but how where they cut?

Quik

View Boris Beaulant's profile

Boris Beaulant

93 posts in 2103 days


#7 posted 05-12-2017 05:24 AM

@Madts, the veneer thickness is 2mm
@Quik, all the process for edges is shown in the video.
1. I draw a curve
2. I cut along the curve with bandsaw
3. I clamp the jig on the table top
4. I use the router with a 22,5° flush bit

View Quikenuff's profile

Quikenuff

61 posts in 647 days


#8 posted 05-13-2017 03:42 AM

Thanks Boris,

I see it now, don’t know how I missed it before. I really like that detail. Thanks for sharing.

Quik

View michelletwo's profile

michelletwo

2688 posts in 2793 days


#9 posted 05-13-2017 11:06 AM

I watched the video, because of the veneer top. thanks for sharing your process.

View Roger's profile

Roger

20871 posts in 2581 days


#10 posted 05-14-2017 12:01 PM

Elegant and modern. Nice build.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com