| Project by TZH | posted 1109 days ago | 1334 views | 1 time favorited | 2 comments |  |
 |
Just a few more napkin or envelope holders I made out of Rocky Mountain Red Juniper. I’d posted one earlier, and wanted to show a little bit more how these can look. Each one has its own unique character. I used different stains on some of them to give different looks, too. Each is finished with multiple coats of lacquer and a final with Trewax.
-- https://www.facebook.com/pages/Dead-Wood-Renaissance/361417090585685
| Pin It |
2 comments so far
donjoe
home | projects | blog
1349 posts in 1196 days
#1 posted 1109 days ago
These look very nice. Good job.
-- Donnie-- listen to the wood.
TZH
home | projects | blog
330 posts in 1305 days
#2 posted 1109 days ago
Thanks for the comments. Corey Jolly, the large holes in the bigger piece are for wine bottles. I used a combination of a 3 1/2” hole saw, forstner bits, drill press, and 1/2” Dewalt drill that clocked my shin in the same place twice :). Anyway, it was very labor intensive, and I’m trying to come up with a better way of drilling the holes.
-- https://www.facebook.com/pages/Dead-Wood-Renaissance/361417090585685
Have your say...