Pine box for my new Dremel jig

  • Advertise with us
Project by woodshaver Tony C posted 04-20-2017 01:28 AM 1710 views 3 times favorited 23 comments Add to Favorites Watch

I made a jig for my dremel which Double DD helped me with and then he posted a nice Cherry box that he made to keep everything organized. Well after seeing what he made I couldn’t resist and made one for my dremel jig.
I had a 1”x 12” pine stair tread that I bought for something (can’t remember old age I guess) and resewed to 1/4” thickness to make this box. This wood has a supper thin veneer on it and junk pine wood in the middle. But for this box I guess it will have to do. The sticker said Made in China… I had a little cherry so I added a strip on the edge and made some wide splines with it to give it a little contrast.

My thanks to Double DD for the inspiration!

Box measurement are 12” X 7” X 5 1/2” and Danish Oil finish

Thanks for looking!
All comment excepted good or bad!

-- St Augustine FL, Experience is the sum of our mistakes!

23 comments so far

View Joe Lyddon's profile

Joe Lyddon

10210 posts in 4137 days

#1 posted 04-20-2017 01:31 AM

Nice little Shop box for your tool(s)...


-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: ... My Small Gallery:"

View Jim Jakosh's profile

Jim Jakosh

20923 posts in 3190 days

#2 posted 04-20-2017 01:34 AM

Real nice box for your jig, Tony!! It is nice to have a place for everything!!

Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View tyvekboy's profile


1783 posts in 3098 days

#3 posted 04-20-2017 03:36 AM

Nice little box.

-- Tyvekboy -- Marietta, GA ………….. one can never be too organized

View doubleDD's profile


7559 posts in 2128 days

#4 posted 04-20-2017 03:37 AM

The box looks great Tony and the cherry strips make it better. I see how you stored the wrench, I think I’ll copy that. Mine is tucked between the back wall and the kaizen foam. Looks to be a nice piece of clear pine to me.
I got to use the dremel again today. I found out it is only .8 amps. A lot less than the new models.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View luv2learn's profile


2811 posts in 2388 days

#5 posted 04-20-2017 04:57 AM

Beautifully done box Tony and well thought out as well. You do quality work my friend.

-- Lee - Northern idaho~"If the women don't find you handsome, at least they ought to find you handy"~ Red Green

View BobWemm's profile


2501 posts in 2011 days

#6 posted 04-20-2017 06:00 AM

Geez Tony, that is toooooo flash.
Great job Buddy, and I love the wood contrasts.


-- Bob, Western Australia, The Sun came up this morning, what a great start to the day. Now it's up to me to make it even better. I've cut this piece of wood 4 times and it's still too damn short.

View steliart's profile


2761 posts in 2773 days

#7 posted 04-20-2017 06:51 AM

Simply a beauty !!!!!!!!

-- Stelios L.A. Stavrinides: - I am not so rich to buy cheap tools, but... necessity is the mother of inventions !!!

View hunter71's profile


3208 posts in 3272 days

#8 posted 04-20-2017 10:26 AM

Very nice Tony. Never work for my dremels when I am carving.

-- A childs smile is payment enough.

View jeffswildwood's profile


3406 posts in 2062 days

#9 posted 04-20-2017 11:33 AM

Very nice. I need to make one of the dremel jigs. Nice storage box which should hold everything for years.

-- We all make mistakes, the trick is to fix it in a way that says "I meant to do that".

View  woodshaver Tony C   's profile

woodshaver Tony C

6100 posts in 3438 days

#10 posted 04-20-2017 11:34 AM

Thanks, Joe, Jim, and tyvekboy,
I think it’s happy in it’s new home! :)

Thanks Dave,
I just stuck that magnet there with some CA glue for quick access. If you look in the box you can see the butt joints of the pine and there are some large knots also. I put the thin veneer side out. Maybe you should look into updating to a more powerful dremel.

Thanks, Lee, Bob, Stelios and Doug.
Dave and Klause are keeping me so busy. Still trying to get my to do list completed! Guess there is no chance of that happening LOL!

Thanks Jeff,
It’s nice when everything is in one place!

-- St Augustine FL, Experience is the sum of our mistakes!

View Roger's profile


20931 posts in 2889 days

#11 posted 04-20-2017 12:36 PM

Very snazzy Tony.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed.

View mochasatin's profile


141 posts in 3048 days

#12 posted 04-20-2017 01:06 PM

I like it!

-- Scott

View SenecaWoodArt's profile


438 posts in 1704 days

#13 posted 04-20-2017 01:21 PM

Very nice, but get rid of that made in China sticker.

-- Bob

View kiefer's profile


5619 posts in 2752 days

#14 posted 04-20-2017 01:45 PM

Nice of you to take the time and care of that Dremel tool and jig and make a fine looking storage box with nice hardware and some nice cherry accents for it .
Now taking a good look at the pictures it look more like 7/16” material to me which is about right for a box this size .

Klaus /Kiefer

-- Kiefer

View helluvawreck's profile


31994 posts in 2952 days

#15 posted 04-20-2017 02:46 PM

This is a fine tool box. It will be a safe place to put this dremel jig and a great addition to your shop.

helluvawreck aka Charles

-- helluvawreck aka Charles,

showing 1 through 15 of 23 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics