LumberJocks

board storage

  • Advertise with us
Project by Upgrayedd posted 04-14-2017 10:31 PM 594 views 1 time favorited 1 comment Add to Favorites Watch

Similar to Jay Bates version, but I attached verticle supporst every other stud, 32” spacing…. no regrets.

On right side I doubled up 2×4 verticlts so I could easily store 8ft material – ply or 2×4’s wouldn’t fit if I didn’ t double up one side.

Lesson learned” the pipe is.84”, and I drilled my holes with a 0.875” spade bit on drill press at 1deg angle… I end up level w/ 1 degree but I’d increase the angle = experiment, maybe 4 degree or so.

use a carbide blade in sawzaw and each cut is only 30 seconds on black pipe. Space out so in vice so you rest against vice, instead of freehanding it w/ sawsawz.

-- Upgrayedd - spelled thusly, with two Ds, for a double dose of this pimping.





1 comment so far

View Jamie Bush's profile

Jamie Bush

20 posts in 464 days


#1 posted 04-15-2017 12:55 AM

Nice Rack!

-- A practicing woodworker sounds a lot better than a practicing MD

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com