Workbench/Outfeed Table!

  • Advertise with us
Project by Beginningwoodworker posted 04-24-2010 01:59 AM 3732 views 2 times favorited 16 comments Add to Favorites Watch

I built the workbench/outfeed table out of scrap 2×4’s and plywood. Its good to have a outfeed table to support long rip cuts.

16 comments so far

View Eric in Florida.'s profile

Eric in Florida.

3750 posts in 2612 days

#1 posted 04-24-2010 02:11 AM

Looks good & sturdy Charles.
That storage underneath is handy too.

-- Nothing is particularly hard if you divide it into small jobs ~ Henry Ford

View patron's profile


13409 posts in 2378 days

#2 posted 04-24-2010 02:20 AM

looks like it does the job ,
makes those rips safer too !

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View grizzman's profile


7618 posts in 2340 days

#3 posted 04-24-2010 02:22 AM

you did good charles….ive had my outfeed table from day one..its served me well as yours will help you…did you see the notice i put up for a lumberjock picnic at my place on the last saturday of may…..i sure hope you can come…let me know….grizzman

-- GRIZZMAN ...[''''']

View Beginningwoodworker's profile


13347 posts in 2710 days

#4 posted 04-24-2010 02:26 AM

Ok Gizzman, I will sent you a PM.

View matt garcia's profile

matt garcia

1853 posts in 2709 days

#5 posted 04-24-2010 02:33 AM

Nice outfeed table!!

-- Matt Garcia Wannabe Period Furniture Maker, Houston TX

View lew's profile


10619 posts in 2792 days

#6 posted 04-24-2010 02:44 AM

Great looking table, CJ.

Glad you didn’t make the same mistake as me. My first design would not allow the saw motor to move far enough to make 45 degree cuts.


-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View donjoe's profile


1360 posts in 2068 days

#7 posted 04-24-2010 02:56 AM

Good job on the table Charles.

-- Donnie-- listen to the wood.

View jack1's profile


2008 posts in 3064 days

#8 posted 04-24-2010 04:30 AM

looks like you’re in business!

-- jack -- ...measure once, curse twice!

View Ken90712's profile


15838 posts in 2225 days

#9 posted 04-24-2010 10:58 AM

Nice use of scarps and always good to have an outfeed tabele and something you can glue up on and not worry about trashing it. Keep it up.

-- Ken, "Everyday above ground is a good day!"

View blockhead's profile


1472 posts in 2345 days

#10 posted 04-24-2010 01:21 PM

Nice job Charles, it should serve you well.

-- Brad, Oregon- The things that come to those who wait, may be the things left by those who got there first.

View BTKS's profile


1983 posts in 2501 days

#11 posted 04-24-2010 06:56 PM

Good use of space and scrap. I don’t know what I did without an outfeed. Oh yea, fought roller stands all the time. You’ll love it! Later, BTKS

-- "Man's ingenuity has outrun his intelligence" (Joseph Wood Krutch)

View Napaman's profile


5435 posts in 3114 days

#12 posted 04-26-2010 04:40 AM

nice table…that will sure help…

-- Matt--Proud LJ since 2007

View mafe's profile


10515 posts in 2126 days

#13 posted 05-23-2010 09:25 PM

I can see you are moving along, how are you doing?
Any sight of ‘lumber’ jobs?

-- MAD F, the fanatical rhykenologist and vintage architect. Democraticwoodworking.

View Beginningwoodworker's profile


13347 posts in 2710 days

#14 posted 05-23-2010 09:40 PM

Nothing yet, but I will keep looking.

View a1Jim's profile


113725 posts in 2614 days

#15 posted 05-23-2010 09:42 PM

that will do a good job for you

-- Custom furniture

showing 1 through 15 of 16 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics