LumberJocks

Tablesaw on wheels Festool

  • Advertise with us
Project by mafe posted 04-23-2010 11:18 PM 3276 views 1 time favorited 5 comments Add to Favorites Watch

Since my workshop are quite small, I had to come up with a solution, to be able to move the tablesaw out, and bring the vac.
I was studying several soulutions, but found them all too complex, so this is what I came up with.
Simple, and effective, and It can even hold some tools also, so I’m quite satisfied.
I will look out for some old wheels, to make a upgrade on this, but they works fine for now.
Plywood, some old pine, aluprofile, and wheels from a baby trached carrier.

-- Mad F, the fanatical rhykenologist and vintage architect. Democraticwoodworking.





5 comments so far

View Dennisgrosen's profile

Dennisgrosen

10850 posts in 1860 days


#1 posted 04-24-2010 01:21 AM

that was realy clever Mads to use the princip
from a dolly to move sheedgoods with
thankĀ“s for sharing the tip

Dennis

View Gar's profile

Gar

84 posts in 2079 days


#2 posted 04-24-2010 03:48 AM

Mafe thats kinda smart. If I’m looking at it right you set the blocks under the bar. With this it raises the other end up and works like a dolly. Then when you put the blocks down the saw sits down on the floor. Simple but verry affective Good job

-- GAR

View Jim Jakosh's profile

Jim Jakosh

12327 posts in 1850 days


#3 posted 04-24-2010 03:36 PM

That’s a cool solution. Necessity is the mother of invention again!!!!!!!!!
Nice job. thanks for sharing.

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View stefang's profile

stefang

13623 posts in 2079 days


#4 posted 04-28-2010 02:48 PM

Good idea Mads. A lot of people get rid of their old BBQs and they usually have wheels (the BBQs not the people).

-- Mike, an American living in Norway.

View mafe's profile

mafe

9668 posts in 1834 days


#5 posted 04-29-2010 01:50 PM

Thank you for the words.
Yes I had been drawing on some different princips with four wheels, but they took up the space under.
So I was scratching my neck, and wondering if I coud use the princips of waight and arm on this, in that way I would need only two wheels, and also I could use the space under, and it works perfectly.
Good idea Mike, with the BBQ wheels.

-- Mad F, the fanatical rhykenologist and vintage architect. Democraticwoodworking.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase