LumberJocks

addition to the tablesaw,cabinet i posted a month or so ago

  • Advertise with us
Project by jpc posted 1590 days ago 2230 views 3 times favorited 8 comments Add to Favorites Watch

I needed to frame in that open area between the fence rails, and also wanted a downdraft type of sanding area so i took from some ideas i seen on the internet, Its not big measuring in at 27inchs by 16 and a half inchs but i dont normally built anything really big so i think this will work out good for me, and being in a two car garage anything helps with the dust controll, thanks for looking guys





8 comments so far

View bake's profile

bake

335 posts in 2309 days


#1 posted 1590 days ago

Looks good, how well does it work?

-- I love the smell of Home Depot in the morning, it smells like.......carpentry. Bake, Bar Lazy U Woodworks, Lehi,UT.

View BritBoxmaker's profile

BritBoxmaker

4358 posts in 1667 days


#2 posted 1590 days ago

Ingenious multiple use of space. Well done.

Martyn

-- Martyn -- Boxologist, Pattern Juggler and Candyman of the visually challenging. http://www.theartofboxes.com

View swayze's profile

swayze

97 posts in 1719 days


#3 posted 1590 days ago

Great idea. Did you put baffles in the box?

View Cher's profile

Cher

934 posts in 1725 days


#4 posted 1590 days ago

When the car is parked outside it looks so clean,

park it in the garage and the next morning it is

full of wood dust.

-- When you know better you do better.

View Dusty56's profile

Dusty56

11644 posts in 2319 days


#5 posted 1590 days ago

I made a similar unit and enlarged the holes slightly. Then I put one of those sanding / routing mats over the top of it to cushion the piece being sanded and it also helps to keep it in place and also allows the sanding dust to get sucked thru it : )
Nice project !

-- I'm absolutely positive that I couldn't be more uncertain!

View Toolz's profile

Toolz

1003 posts in 2374 days


#6 posted 1590 days ago

Great idea.

-- Larry "Work like a Captain but Play like a Pirate!"

View ND2ELK's profile

ND2ELK

13495 posts in 2405 days


#7 posted 1589 days ago

Thanks for the inspiration. I want to do something like this but have not had time to do it yet. Great minds must thing a lot.

God Bless
tom

-- Mc Bridge Cabinets, Iowa

View jpc's profile

jpc

139 posts in 1812 days


#8 posted 1589 days ago

yea ive kicked the idea around for a while, tried it out tonight for the first time, did ok not all the way happy with it, apparently i didnt have the internal peices/baffles fastened appropriatly and they moved while hanging it, glued up that way, id say honestly it took away about half its effectiveness, brightside though …. when the hard board is due to be replaced ill fix the problem. untill then its still alot better while sanding than previously and i did notice a big difference, thanks everyone for the suuport

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase