LumberJocks

OSCILLATING SPINDLE SANDER PATTERN SANDING ATTACHMENT (VIDEO)

  • Advertise with us
Project by kiefer posted 03-29-2017 06:15 PM 2418 views 7 times favorited 26 comments Add to Favorites Watch

Yesterday I posted the drill press pattern sanding attachment and thought I share this with you that have oscillating spindle sander .I few have ask if I shortened the drum and the answer is that I made a drum from
1 1/2 “ABS pipe that you can view my previous You Tube video .
https://www.youtube.com/watch?v=VLaUotPNJ5c

This uses the same pattern follower disc that I used on the drill press and I made a video in which I explain how it work which makes it a lot easier to explain .
Watch it and let me know what you think .

https://www.youtube.com/watch?v=CVbuYeXYk9A

Klaus

-- Kiefer https://www.youtube.com/user/woodkiefer1/videos





26 comments so far

View CharlieK's profile

CharlieK

496 posts in 3546 days


#1 posted 03-29-2017 06:48 PM

Klaus, I absolutely love this! Did you have to shorten the sanding drum to make room for the guide bearing?

-- Adjustable Height Workbench Plans http://www.Jack-Bench.com

View  woodshaver Tony C   's profile

woodshaver Tony C

5361 posts in 3106 days


#2 posted 03-29-2017 07:16 PM

Another great idea from a great mind! After seeing the last one you posted I said to myself … I bet oscillating will be the next thing you do!
I clicked on the link to watch the video but it didn’t work Klaus. I might be something on my end check it out.
Nice job on this project

-- St Augustine FL, Experience is the sum of our mistakes!

View kiefer's profile

kiefer

5466 posts in 2420 days


#3 posted 03-29-2017 08:55 PM

Charlie
I made the is shop made and there is a video previous to this one and I don’t’ use the drum that comes with the sander for this .
Tony
You must have ESP.
Try the link now it should work .

-- Kiefer https://www.youtube.com/user/woodkiefer1/videos

View Roger's profile

Roger

20871 posts in 2557 days


#4 posted 03-29-2017 09:41 PM

I think this is fantastic Klaus. You should patent this….........Seriously

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com

View bushmaster's profile

bushmaster

2263 posts in 2035 days


#5 posted 03-30-2017 12:04 AM

When I first looked at I thought the pattern was the thin one, but now I see you have to make a thick pattern as great as the oscillation. What I was wondering, I went out and checked mine, same model, it only has a 1/8 washer under neath, when I held the sleeve up to compensate for the thickness of the bearing plate there really was not enough spindle length to put the nut on. It appeared that you had the normal amount of thread showing. As it is not designed for the large spacer on the bottom did you cut the sleeves down, I hardly think you did, am I missing something.

-- Brian - Hazelton, British Columbia

View  woodshaver Tony C   's profile

woodshaver Tony C

5361 posts in 3106 days


#6 posted 03-30-2017 12:20 AM

Got to see the video Klaus! Good video and easy to understand.
Thanks for sharing your idea.

-- St Augustine FL, Experience is the sum of our mistakes!

View kiefer's profile

kiefer

5466 posts in 2420 days


#7 posted 03-30-2017 12:22 AM

Roger
It’s useless to get a patented and it will be made in China before you know it .

-- Kiefer https://www.youtube.com/user/woodkiefer1/videos

View kiefer's profile

kiefer

5466 posts in 2420 days


#8 posted 03-30-2017 12:22 AM

Tony
Thanks for that .

-- Kiefer https://www.youtube.com/user/woodkiefer1/videos

View kiefer's profile

kiefer

5466 posts in 2420 days


#9 posted 03-30-2017 12:26 AM

Brian
The drum that I am using is shop made and shorter if you look at my previous video you will that it is a short piece of 1 1/2” ABS with plywood plugs glued into the ends .
https://www.youtube.com/watch?v=VLaUotPNJ5c&t=4s

-- Kiefer https://www.youtube.com/user/woodkiefer1/videos

View Joe Lyddon's profile

Joe Lyddon

9887 posts in 3805 days


#10 posted 03-30-2017 12:51 AM

Another Flush-Trim Sanding drum… COOL… Thank you!

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: http://www.ncwoodworker.net/pp/showgallery.php?ppuser=1389&cat=500"

View jbay's profile

jbay

1663 posts in 652 days


#11 posted 03-30-2017 12:53 AM

Great idea kiefer.
I hadn’t seen that you shortened the drum, I was wondering about that.
Thanks for mentioning it.

-- If anyone would like to see my Portfolio, PM me and I would be glad to send you the link.

View Rayne's profile

Rayne

614 posts in 1292 days


#12 posted 03-30-2017 01:45 AM

What a great addition. I’ll have to add this to my “to-do” list, which is long enough as it is. That’s normal right? lol.

View kiefer's profile

kiefer

5466 posts in 2420 days


#13 posted 03-30-2017 02:28 AM

Joe
You are welcome !

-- Kiefer https://www.youtube.com/user/woodkiefer1/videos

View kiefer's profile

kiefer

5466 posts in 2420 days


#14 posted 03-30-2017 02:30 AM

Jbay
You are welcome and it’s fun to share ideas .
I hope you subscribed to my You Tube channel as there is more to come .

-- Kiefer https://www.youtube.com/user/woodkiefer1/videos

View kiefer's profile

kiefer

5466 posts in 2420 days


#15 posted 03-30-2017 02:32 AM

Rayne
Yap that is normal and post it when you made one .

-- Kiefer https://www.youtube.com/user/woodkiefer1/videos

showing 1 through 15 of 26 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com