LumberJocks

Crib

  • Advertise with us
Project by JInBrem posted 03-28-2017 06:00 PM 382 views 0 times favorited 3 comments Add to Favorites Watch

I built this crib for my Granddaughter. It is constructed from pine. The back is a herringbone pattern “panel” that is installed in a dado framework. The slats were all cut from 3/8” pine 1 1/2” wide. Used a roundover bit to roundover the sides of the slats. It is built to be convertible into a youth bed and later a full size bed.
The majority of the joinery is dowels, using my DOWELMAX. Each slat has 4 dowels (2 upper/2 lower), the lower portion of the front and sides was constructed by ripping a 3/4” piece of pine and sandwiching (side to side) a 1/2” piece of pine. They were also doweled together. The back framework was also doweled.





3 comments so far

View Blackberry's profile

Blackberry

85 posts in 906 days


#1 posted 03-28-2017 10:16 PM

Congratulations on the grandchild & a job well done!

View david38's profile

david38

3518 posts in 2096 days


#2 posted 03-29-2017 01:47 PM

looks great

View helluvawreck's profile (online now)

helluvawreck

27761 posts in 2620 days


#3 posted 03-29-2017 06:04 PM

You did a fine job on this crib; it really looks nice and I’m sure that it was made with tender loving care. Congratulations.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com