| Project by emetric | posted 1131 days ago | 1369 views | 1 time favorited | 6 comments | ![]() |
![]() |
This toy box was made for a friend’s kid. I made it kinda last minute and I am very pleased with the fact that I was able to put this together so quickly. I think start to finish the construction took roughly 5-6 hours with the exception of gluing up the lid. My friend and his wife were quite pleased, so mission accomplished! The box is of frame and panel construction utilizing pocket screws (easily the one the fastest strong joints that you can use). The frame and lid and pine and the bottom and panels are birch ply. Enjoy and thanks for looking.
-- "One often meets his destiny on the road he takes to avoid it." Master Oogway
| Pin It |




























6 comments so far
4woodturning
home | projects | blog
187 posts in 1148 days
#1 posted 1130 days ago
Great looking toy box, very nice work.
-- Jeff, Missouri ,"Just because your not bleeding, dont mean your turning safely!"..............http://www.4woodturning.com
jockmike2
home | projects | blog
10636 posts in 2413 days
#2 posted 1130 days ago
Nice box and a nice gesture.
-- (You just have to please the man in the Mirror) Mike from Michigan -
workerinwood
home | projects | blog
2483 posts in 1234 days
#3 posted 1130 days ago
Good job!! I’m sure your friends are pleased.
-- Jack, Albuquerque
David "Lucky Dawg" Brown
home | projects | blog
440 posts in 1159 days
#4 posted 1130 days ago
very nice box!
-- dumpster diver delux
Jason
home | projects | blog
628 posts in 1675 days
#5 posted 1130 days ago
Nice toy box there.
-- Jason - Colorado Springs
dbhost
home | projects | blog
4748 posts in 1399 days
#6 posted 700 days ago
Very nice. I wouldn’t have thought of using pocket screw joints…
-- Manufacturer of fine quality sawdust since 1984. Comments and advice on my shop welcome. Check it out at http://lumberjocks.com/dbhost/workshop. Gladly accepting shop build donations!
Have your say...