LumberJocks

Router Table

  • Advertise with us
Project by ozark_hillbilly posted 03-17-2017 01:26 PM 1099 views 3 times favorited 8 comments Add to Favorites Watch

After moving to a new shop with plenty of room, I finally decided to build a router table. Nothing fancy, just a laminated top with 2x lumber for the base. I did at least mortise and tenon the base together. Glue up and laminating was a bit of a hassle, it was the middle of the winter and significantly too cold in the shop for such activities. Thankfully, the wife was gone for an evening so I was able to sneak inside to get everything put together. Note to self, find a heating source for the shop before next winter!

-- Overkill is Underrated...





8 comments so far

View woodworm's profile

woodworm

14326 posts in 3196 days


#1 posted 03-17-2017 01:48 PM

Very nice built.

-- masrol, kuala lumpur, MY.

View fivecodys's profile

fivecodys

673 posts in 1242 days


#2 posted 03-17-2017 03:24 PM

Nice job. That should provide many years of service.

-- Chem, Central California

View  woodshaver (Tony)   's profile

woodshaver (Tony)

4623 posts in 2959 days


#3 posted 03-17-2017 03:30 PM

I really like the large table surface and the open design! You got me thinking that this would be a good idea in my small 2 car garage because your table could double as a light duty work table by putting a plywood cover over the table when it’s not in use. Also a large drawer could easily be added for storage.
Nice job on this and thank you for sharing!

-- St Augustine FL, Experience is the sum of our mistakes!

View Woodchuck2010's profile

Woodchuck2010

668 posts in 464 days


#4 posted 03-17-2017 04:03 PM

Great table. Lots of room for storage and dust collection cabinet.

-- Chuck, Michigan,

View builtinbkyn's profile

builtinbkyn

963 posts in 546 days


#5 posted 03-17-2017 04:06 PM

Nice table. You’re going to love the real estate that table provides.

-- Bill, Yo!......in Brooklyn :)

View helluvawreck's profile

helluvawreck

25336 posts in 2472 days


#6 posted 03-17-2017 06:14 PM

That’s a real nice shop table. Congratulations and welcome to Lumberjocks.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View dsb's profile

dsb

24 posts in 484 days


#7 posted 03-19-2017 05:31 AM

I like it

-- dsb

View NormG's profile

NormG

5730 posts in 2610 days


#8 posted 03-19-2017 11:57 PM

Very nicely done. Maybe use as an out-feed table also?

-- Norman - I never never make a mistake, I just change the design.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com