LumberJocks

teak bowl

  • Advertise with us
Project by davidmh posted 04-10-2010 03:52 AM 1200 views 2 times favorited 7 comments Add to Favorites Watch

teak bowls I made with a jig on the table saw





7 comments so far

View Jim Jakosh's profile

Jim Jakosh

11549 posts in 1771 days


#1 posted 04-10-2010 04:35 AM

That’s a cool bowl and to not be made with a lathe is also cool. Can you show us a pic of how you set that up to cut it out round on the table saw?

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View Jonathan's profile

Jonathan

2605 posts in 1716 days


#2 posted 04-10-2010 05:26 AM

I’m thinking this took an awful lot of time raising and lowering the blade! Or is my thinking off the mark?

Wait, in looking at that second picture closer, it looks like you turned the bowl a blade width at a time, and kept the height the same, is that right?

I’d be curious to read an instructional blog on the jig and the use of the jig in making this project. Is that a possibility?

-- Jonathan, Denver, CO "Constructive criticism is welcome and valued as it gives me new perspectives and helps me to advance as a woodworker."

View davidmh's profile

davidmh

19 posts in 1635 days


#3 posted 04-10-2010 05:46 AM

Thanks. The jig involved a large lazy susan that I bolted down around the blade with the work piece clamped to the top. I would spin the piece as i raised the blade very slowly. The hard part was centering the jig to the top of the blade at its highest point.

View Broda's profile

Broda

313 posts in 2184 days


#4 posted 04-10-2010 06:01 AM

awesome!
great idea. are you going to blog it?

-- BRODY. NSW AUSTRALIA -arguments with turnings are rarely productive-

View Hippockets's profile

Hippockets

88 posts in 1772 days


#5 posted 04-10-2010 04:25 PM

What a great project. It proves “necessity is the mother of invention”.

-- Bruce, Arnold MD bjordan443@aol.com

View newTim's profile

newTim

554 posts in 2272 days


#6 posted 04-11-2010 08:32 AM

Very nice. I’d sure like to see a picture of that jig if you’re of a mind to share.

-- tim hill www.newcalshop.com

View davidmh's profile

davidmh

19 posts in 1635 days


#7 posted 04-12-2010 02:48 AM

I looked but can’t find the jig I used. I made these a couple of years ago for a crafts fair and I think I scavenged the toggle clamps for another jig. I’ll make another one and take pictures of the process. Thanks again for the kind remarks.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase