LumberJocks

Beer tap handles for a local brewery

  • Advertise with us
Project by swdst posted 03-17-2017 01:17 AM 1172 views 1 time favorited 7 comments Add to Favorites Watch

It has been some time since i have last posted, life has a tendency to do that kind of thing to a person. These were a commissioned job i did for a friend who ownes a brewery in leesburg va.





7 comments so far

View rtbrmb's profile

rtbrmb

664 posts in 2560 days


#1 posted 03-17-2017 01:27 AM

these turned out great – in the main picture, what species of wood is used on the second from the left (some type of ebony?). Also – what was your finishing method?

Thanks for sharing.

Bill in MI

View swdst's profile

swdst

68 posts in 1263 days


#2 posted 03-17-2017 01:52 AM

That was a piece of rotten wood that i stabilized, and then filled with acrylic, and turned down. It wasa trial piece to see how such an idea would turn out, but liked it so much i finished it and added it to the lineup

View ralbuck's profile

ralbuck

5250 posts in 2438 days


#3 posted 03-17-2017 02:29 AM

If the brewery beers are as good as the handles you both have winners.

-- Wood rescue is good for the environment and me! just rjR

View swdst's profile

swdst

68 posts in 1263 days


#4 posted 03-17-2017 02:47 AM

Bill, I sand to 220-ish, 4-5 coats of thin Ca, and wet sand with micromesh, sometimes I’ll use acrylic polish after

View artsyfartsy's profile

artsyfartsy

1061 posts in 1330 days


#5 posted 03-17-2017 01:27 PM

Nice Job on the handles. What did you finish them with?

-- DWelch. Michigan, The only dumb question is the one not asked!

View helluvawreck's profile

helluvawreck

32087 posts in 3038 days


#6 posted 03-17-2017 06:09 PM

Wow! I love those. That’s a whole collection of them and they are all different. That’s a colorful way to tell what’s what. Nice work.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View Kevin's profile

Kevin

560 posts in 2470 days


#7 posted 03-17-2017 09:39 PM

Wow! Very nice.

-- Measure twice, cut once, then sand a whole bunch

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com